Fetco CBS-71A Operation & User’s Manual

File Specifications

Brand: Fetco
Category: Coffee Maker
Model: CBS-71A (Operation & User’s Manual), prrdd7VSFvToM
File Type: PDF
File Size: 3.69 Mb
Pages: 20 pages

Download Document

Get a high-quality, printable PDF version of this manual for offline use.

Download PDF Manual (20 pages)

⚠️ Download Safety: This PDF is completely safe to download (last scan date: 30/07/2026).

Read Online

Read the Fetco CBS-71A Operation & User’s Manual online using the built-in PDF viewer.

Key Pages of Document

FETCO®, and LUXUS® are trademarks or trade names of Food Equipment Technologies Company.

© 2006 Food Equipment Technologies Company Part # P022 Rev. February 8, 2006 www.fetco.com User’s Guide Table of Contents Contact Information ................................................ 2 Description & Features ........................................... 2 Specifications.......................................................... 2 Weights and Capacities . ...

Food Equipment Technologies Company

600 Rose Road Lake Zurich • IL • 60047-0429 • USA Internet: www.fetco.com Phone: (800) 338-2699 (US & Canada) (847) 719-3000 Fax: (847) 719-3001 Email: [email protected] [email protected] Description & Features CBS-71A - Single Coffee Brewer CBS-72AC - Twin Coffee Brewer with mobile dispensers CBS-71AC - Single Coffee Brewer with mobile dispensers CBS- ...

Electrical Configuration and Brewing Efficiency

CBS-71A & AC 6.0 gallons per batch Heater Voltage Maximum Batches per Hour (max 5) Model Configuration Connection Phase Wires KW Amp draw Cold Water Hot Water CBS-71A (-1) 3 X 5 KW 120/208 3 ph. 4 + ground 11.5 33.0 3.0 5.0 120/220 3 ph. 4 + ground 13.3 36.0 3.3 5.0 120/240 3 ph. 4 + ground 15.2 37.9 3.6 5.0 CBS-71A (-2) 3 X 10 KW 120/208 3 ph. 4 + ground 22.7 64.3 4.5 5.0 120/220 3 ph. 4 + ground 26.3 70. ...

CBS-72AT & ATC

6.0 gallons per batch Heater Voltage Maximum Batches per Hour (max10) Model Configuration Connection Phase Wires KW Amp draw Cold Water Hot Water CBS-72AT (-1) 3 X 5 KW 120/208 3 ph. 4 + ground 11.9 35.7 4.7 10.0 with power on each side 120/220 3 ph. 4 + ground 13.7 38.7 5.4 10.0 management 120/240 3 ph. 4 + ground 15.6 40.6 6.2 10.0 CBS-72AT (-2) 3 X 5 KW 120/208 3 ph. 4 + ground 23.1 67.0 6.0 10.0 without power on each side 120/220 3 p ...

(For Qualified Service Technicians Only)

Keys To A Successful Installation If not installed correctly by qualified personnel, the brewer will not operate properly and damage may result. Damage resulting from improper installation is not covered by the warranty. Here are the key points to consider before installation: Electrical: • All FETCO brewers require NEUTRAL. Ground is not an acceptable substitute. Installation without neutral may ...

Install a water shut off valve near the brewer to facilitate service. If an in-line water filter is used, it should

be installed after the water shut off valve and in a position to facilitate filter replacement. • Before connecting the water line to the brewer, flush the line and water filter thoroughly to remove any debris. • Connect the water line to the brewer, and turn on the water to check for leaks. Electrical connection (Steam heated br ...

Transfer System (AT versions only)

Holding Tank Set-up • Place the tank stand in the desired location. • Using a carpenter’s level, adjust the legs until the stand is perfectly level front-to-back, and left-to-right. • Each leg has a flange with 2 holes for bolting the stand to the floor (required for safety). Mark the location of the holes on the floor. • Set the stand aside, and drill holes in the floor as marked. The materials used will de ...

Before brewing, always verify the cleanliness of the brew baskets and dispensers.

1. Push the POWER switch to the ON position • The button will illuminate to indicate that the brewer has power and is operational. 2. Prepare the brew basket(s). • Carefully pull open the drawer holding the brew basket. • Grasp the brew basket by one handle, and turn it until you can reach both handles comfortably. • Grasp both ha ...

1. Before Brewing

• Remove the sight gauge vent cap from the dispenser you want to transfer, and insert the transfer hose into the top of the sight gauge. • Ensure that the dispenser, brew basket, and holding tank cover are in place, and that all old coffee has been drained from the holding tank and dispensers. • Ensure that the Transfer, Automatic switch is in the “OFF” position, and that the ready light is on. • Unlock and t ...

Turn the power switch on.

CONTROL BOARD Display f Hold the SET button for 3 seconds, until the display reads SET. SET f The display will show 0.0 briefly, 0.0 followed by the software version. Example: 10.A 10.A f Press SET. The first parameter number will be displayed briefly, 1.0 followed by the current setting. 312 Example: 1.0 = Brew orifice, .312” Use the UP and DOWN buttons to adjust the setting. f Press SET again. The next param ...

Cleaning & Maintenance

Daily Before brewing, always verify the cleanliness of the brew baskets and dispensers. At the end of the day, remove the brew basket and wipe the bottom of the spray pan with a cloth to remove the coffee oils that have collected. Brew & Bypass Orifices The flow of water through the brew and bypass orifices may gradually become restricted by the accumulation of mineral deposits. The orifices should be inspected periodically and c ...

Figure 2 – CBS-72A Tank Assembly

ITEM # QTY PART # DESCRIPTION 1 3 107010 ASSEMBLY, IMMERSION HEATER, 5000W, 240VAC 1 3 107009 ASSEMBLY, IMMERSION HEATER, 10000W, 480VAC 1 3 107008 ASSEMBLY, IMMERSION HEATER, 10000W, 240VAC 10 4 84002 NUT, HEX, 8-32 31 1 31121 NIPPLE, PIPE, 1/8", 4.25"LG 32 1 31113 COUPLING 1/8" 33 1 58035 SWITCH, PRESSURE, 2PR 34 2 33016 LOCKNUT, 1-1/16" 40 1 31054 FITTING, 1/2 HOSE BARB X 3/8 MPT 41 1 31104 FITTING, EXTRUDED FPT ELB ...

32054 TUBE, THERMAL CIRCUIT BREACKER

68 1 002229 WELDMENT, WATER LEVEL PROBE, 9,0" LG 69 1 002050 WELDMENT, WATER LEVEL PROBE, 2.5" LG 70 2 21026 HOUSING, WATER LEVEL PROBE 71 1 102115 ASSEMBLY, TANK COVER 72 1 24014 GASKET, TANK 73 1 004020 WELDMENT, TANK, CBS-72 74 1 31116 LOCKNUT, 1/8" 76 1 31074 FITTING, 3/8 HOSE BARB X 3/8 MALE PIPE 90 DEG ELBOW 77 1 83041 WASHER, 0.812 O.D X0.412I.D. FLAT 78 1 31120 FITTING, 1/8 STREET 90 DEG. ELBOW 79 1 3112 ...

Figure 3 – CBS-72A Brew Basket Assembly

ITEM # QTY PART # DESCRIPTION 14 1 002069 SPRAY PAN, CBS-70'S 15 1 09011 WIRE BASKET, CBS-70'S 16 1 101134 BREW BASKET ASSEMBLY, CBS-70'S 18 3 21076 BREW BASKER HEIGHT REGULATOR 19 3 83025 SPRING LOCK WHASER, 1/4" 21 0 82044 STAINLESS STEEL HEX CAP SCREW, 1/4-20 X 1.0"LG 22 0 102113 DRAWER ASSEMBLY, CBS-70'S ...

102111 LBD-6 COVER ASSEMBLY

2 1 23044 6 GAL. DISPENSER FUNNEL 3 1 24034 1.00'' I.D. X 1.25 O.D. O-RING 4 1 13050 LBD-6 VENT SCREW 5 1 04053 DISPENSE COVER TOP 6 6 82032 3/8''X 1/2'' S.S. PAN HEAD PHIL. SCREW 7 1 SEALING TAPE 8 1 24015 CBS-70'S 6GAL. DISPENSE COVER GASKET 9 1 22016 6 GAL. DISPENSER INSULATION SET 10 1 04054 LBD-6 GAL.DISPENSER COVER BOTTOM 11 1 84028 5/6-18 NYLON INSERT LOCKNUT 12 1 24016 6 GAL.DISP ...

84015 5/16''-18 HEX NUT

48 1 73024 6 GAL. CONTEINER CASTER, SWIVEL 49 8 84022 3/8-16 MACHINE SCREW NUT 50 8 83031 3/8'' S.S FLAT WASHER 51 8 83032 3/8'' REGULAR SPRING LOCKWASHER 52 2 73025 6 GAL. CONTAINER CASTER 53 1 14011 LBD-6C BALANCE WEIGHT 54 1 82063 3/8-16 X 12'' HEX HD. CAP SCREW ZINC PLATED 55 2 06010 FUNNEL COVER 56 1 82042 ROUND BEAD CHAIN FITTING #8-10 57 1 72006 FUNEL CUP KNOB 58 1 82041 #6 ROUND CHAIN ...