Field Controls 46252300 Instruction Sheet
Text of Field Controls 46252300 Instruction Sheet
REPAIR MOTOR KIT
Model: SWG-4HD, SWGII-4HD, SWG-5
SWGII-5, SWG-6, SWGII-6
BEFORE WORKING ON POWER VENTER,
SHUT OFF ELECTRICAL POWER TO CONTROL BOX
This kit includes a replacement motor assembly for the SWG and SWGII series sidewall power venter
models listed above.
ITEMS INCLUDED:
Replacement Motor and Blower Wheel on Mounting Bracket
Adapter Plate (for SWG
IDENTIFY WHICH MODEL POWER VENTER YOU HAVE
CAUTION: Avoid applying excess pressure on the blower wheel when handling. This will cause an imbalance of the
blower wheel which will result in excessive vibration and premature motor failure.
1. Remove motor cover. (See Figure 1)
2. Verify which power venter you have to determine which section to reference
SECTION I (Models SWG-4HD, SWG-5, SWG-6)
REMOVAL
1. Remove the clamps from the conduit and motor and disconnect the motor lead
wires from the Control Kit. (See Figure 3) Attach a "pull" or "fish" wire to the motor
lead wires on the Control Kit side to use to pull the leads from the new repair kit
motor through the conduit during re-assembly.
2. Remo
SECTION II (Models SWG-4HD, SWG-5, SWG-6)
REMOVAL
1. Remove the electrical box cover from the motor and disconnect the conduit and
wires. (See Figure 9) It is not necessary to disconnect the wires from the Control Kit.
2. Remove the screws securing the motor assembly. Rotate the motor assembly
counterclockwise and slide the assembly into the center, t