Toshiba W7 Installation And Operation Manual

and Operation Manual Document Number: 57442-000 Date: June, 2005 ...

18-pulse PWM drive designed for use with 3-phase AC induction motors. This 18 pulse design includes an 18 pulse input diode bridge rectifier combined with and an integral phase shifting transformer. U.S. Patent 6396723. Japan Patent pending 2000-179543. ...

This manual was written by the Toshiba Technical Publications Group. This group is tasked with providing technical documentation for the W7 Adjustable Speed Drive. Every effort has been made to provide accurate and concise information to you, our customer. At Toshiba we’re continuously searching for better ways to meet the constantly chan ...

Center Toshiba’s Customer Support Center can be contacted to obtain help in resolving any Adjustable Speed Drive system problem that you may experience or to provide application information. The center is open from 8 a.m. to 5 p.m. (CST), Monday through Friday. The Support Center’s toll free number is US (800) 231- ...

W7 ASD Installation and Operation Manual i General Safety Information .................................................................................................... 1 Safety Alert Symbol .................................................................................................... 1 Signal Words ................................. ...

W7 ASD Control .............................................................................................................. 21 CNU1/1A and CNU2/2A Pinout ............................................................................... 22 CN3 Pinout .................................................................. ...

1 General Safety Information DO NOT attempt to install, operate, maintain or dispose of this equipment until you have read and understood all of the product safety information and directions that are contained in this manual. Safety Alert Symbol The Safety Alert Symbol indicates that a potential personal injury hazard ...

Special Symbols To identify special hazards, other symbols may appear in conjunction with the DANGER, WARNING and CAUTION signal words. These symbols indicate areas that require special and/or strict adherence to the procedures to prevent serious injury to personnel or death. Electrical Hazard Symbol A symbol which ...

3 Qualified Personnel Installation, operation, and maintenance shall be performed by Qualified Personnel Only. A Qualified Person is one that has the skills and knowledge relating to the construction, installation, operation, and maintenance of the electrical equipment and has received safety training on the hazards i ...

• The storage temperature range of the W7 ASD is 14 to 104° F (-10 to 40° C). • Do not store the unit in places that are exposed to outside weather conditions (i.e., wind, rain, snow, etc.). • Store in an upright position. Disposal Never dispose of electrical components via incineration. Contact your state e ...