TP-Link TL-WR842ND Application Manual

This guide applies to the following models. TL-WR2543ND TL-WDR4300 TL-WR1042ND TL-WR1043ND TL-WR842ND ...

Chapter 2. Before Installation ...................................................................................................2 Chapter 3. Installation for Windows OS ............................................ ...

Print server is a function embedded in your Router. It allows you to share your printer with computers that are connected to the Router. Typical Topology ) Note: (1) The client utility TP-LINK USB Printer Controller supports Windows 7 32/64 bit, Windows Vista 32/64bit, Windows XP 32/64bit, and Mac. (2) Before connection, plea ...

Before installing the print server, please note the following points: 9 Make sure you have already installed the printer’s driver on your computer. Otherwise, please install it first. 9 Any computer in your LAN must first install the software if it wants to share the print server via the Router. Before ...

-2- Chapter 3. Installation for Windows OS 2. Select your Router model and click USB Printer Setup. 1. Insert the Router’s Resource CD into the CD-ROM drive. 3. Click START. 4. Connect your computer and printer to the Router step by step as instructed. Click NEXT. ...

-3- 5. Check the LED lights and click NEXT. 6. Click NEXT to start installing the printer share software. 7. Please wait a moment for the installation preparation. 8. Click Next and go on to install the TP-LINK USB Printer Controller. ...

-4- 9. Please enter your information in the requested field and then click Next. 11. Click Install to begin the installation. 12. Please wait a while for the installation process. 10. Click Change… to select another destination folder, or leave it default and click Next. ...

-5- 13. Click Finish to complete and exit the InstallShield Wizard. When the installation is completed, the TP-LINK USB Printer Controller will pop up, with whose help you can print documents via the Router now. ) Note: In your LAN, each computer that wants to share the print server should also install the TP-LINK USB Printer Cont ...

-7- Chapter 4. Application for Windows OS TP-LINK USB Printer Controller is used to operate the USB Printer on your own computer. After successful installation, the icon will appear on the desktop of your computer. 4.1 To Launch/Exit the TP-LINK USB Printer Controller ¾ To launch the USB Printer Controller, double-click the ...

-8- 4.2 To Utilize the TP-LINK USB Printer Controller 4.2.1 To Print To print, first of all, you need to set your Auto-Connect Printer. After successful setting, you can execute your printing tasks automatically. Please follow the steps below to set your auto-connect printer. Step 2: Click the inverse triangle mark on the Auto-Conn ...