Samsung PS-42P4A1 Owner's Instructions Manual

please read this manual thoroughly, and retain it for future reference. ON-SCREEN MENUS PICTURE IN PICTURE (PIP) COLOUR WEAKNESS ENHANCEMENT MODE MY COLOUR CONTROL TELETEXT (OPTION) SRS TRUSURROUNDXT DIGITAL NATURAL IMAGE ENGINE This device is a Class B digital apparatus. ...

Do not display a still image (such as on a video game or when hooking up a PC to this PDP) on the plasma monitor panel for more than 2 hours as it can cause screen image retention. This image retention is also known as “screen burn”. To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image. ◆Height The PDP can normally operate only under 2000m i ...

Owner’s Instructions Remote Control/ AAA Batteries Power Cord Ferrite Core for Speaker Wire Ferrite Core for Side AV Cable S-VIDEO Cable PC Cable DVI Cable Antenna Cable Scart Cable PC Audio Cable Component Cables (RCA) Sold Separately This feature brings you more detailed image with 3D noise reduction, detail enhancement, contrast enhancement and white enhancement. New image compensation Algorithm gives brighter, cl ...

■ Your New Plasma Display Panel................................................................... 6 ■ Infrared Remote Control................................................................................ 8 ■ Inserting the Batteries in the Remote Control.................... ...

■ Preventing Screen Burn-in....................................................................... ..... 42 ■ Changing the Sound Standard ...................................................................... 43 ■ Adjusting the Sound Settings ........................................................................ 44 ■ Adjusting the Volume Automatically ......................................... ...

Front Panel ➢ The actual configuration on your PDP may be different, depending on your model. Speaker a) SOURCE External input selection. b) MENU Menu display. c) - + Volume adjustment. Also used to select or adjust items on the on-screen menu. d) C/P. Channel selection. Auto power On. Also used to move up or down in the on-screen menu. e) Confirm your choice (Store or Enter). f) I / Press to turn the PDP on and off. Power I ...

➢ The actual configuration on your PDP may be different, depending on your model. Rear Panel Side of the TV ➢ For further details about connection, refer to pages 55~59. Audio Input (L, R) Video Input S-Video Input a) DVI INPUT (DVI-D / L-AUDIO-R) Connect to the digital video and audio output jack for device with DVI output. b) MONITOR OUT (VIDEO / L-AUDIO-R) Outputs for external devices. c) EXT.1, EXT.2, EXT.3 ...

English - 8 ➢ The performance of the remote control may be affected by bright light. PICTURE EFFECT SELECTION PICTURE SIZE/ TELETEXT SIZE SELECTION MENU DISPLAY/ TELETEXT INDEX DNIe ON/DEMO/OFF MOVE TO THE REQUIRED MENU OPTION/ ADJUST AN OPTION VALUE RESPECTIVELY TURNS THE PDP ON AND OFF FASTEXT TOPIC SELECTION INFORMATION DISPLAY/ TELETEXT REVEAL TV MODE SELECTION EXIT TELETEXT (DEPENDING ON THE MODEL) DIRECT CHANNEL SELECTION EX ...

you: ◆Purchase the PDP ◆Find that the remote control is no longer operating correctly 1 Remove the cover on the rear of the remote control by pressing the symbol ( ) downwards and then pulling firmly to remove it. 2 Insert two R03, UM4, “AAA” 1.5V or equivalent batteries taking care to respect the polarities: ◆ - on the battery against - on the remote control ◆ + on the battery ...

Wall Mount Bracket Mounting Kits (Sold Separately) 4 EA 4 EA Plastic Hanger Screws How to Adjust Mounting Angle 1 Secure the PDP to the wall mount bracket. (Please refer to the following instructions.) 2 Set the angle by pulling the upper end of the PDP attached to bracket in the direction of the arrow. 3 The angle can be adjusted from 0° to 15° by ±2°. The wall mount bracket is delivered separately. ...

1 Remove the screws from the back of the PDP. 3 Tighten the screws of the plastic hanger to the back side of the PDP. 4 Put the 4 pegs on the PDP in the grooves of the wall mount bracket and pull down on the PDP (!) to secure it to the wall mount bracket (@). Tighten the screws as shown (#) so that the PDP cannot be separated from wall mount bracket. 2 Use the screws and assemble the plastic h ...

network, you must connect a satellite receiver to the rear of the PDP. Also, in order to descramble a coded transmission signal, you must connect a decoder to the rear of the PDP. Using a Coaxial cable Connect a coaxial cable to the: ◆ Receiver (or Decoder) output socket. ◆ Television aerial input socket. ➢ If you wish to connect both a satellite receiver (or decoder) and a VCR, you sh ...

1 Plug the mains lead into an appropriate socket. Result: The Standby indicator on the front of the PDP lights up. ➢ The main voltage is indicated on the rear of the PDP and the frequency is 50 or 60Hz. 2 Press the “ I / ” button on the front of the PDP (or POWER ( ) button on the remote control) to switch the PDP on. Result: The programme that you were watching last is re- selected automatically. � ...

The remote control is used mainly to: ◆Change channels and adjust the volume ◆Display the on-screen menu system The following table presents the most frequently used buttons and their functions. Button Viewing Function Menu Function Used to display the next - stored channel. Used to display the - previous stored channel. to Used to display the corresponding channels. ➢ For double digit channels, the second di ...

top box (STB), in addition to controlling the PDP. ➢ The remote control is not compatible with the TV manufactured by another company. 1 Turn off your VCR, Cable box, DVD or STB. 2 Press the SELECT button. Mode is changed whenever SELECT button is pressed. 3 Press the POWER ( ) button on the remote control. The component you select should turn on. If it turns on, your remote control is now ...

settings proceed automatically and subsequently. The following settings are available. 1 If the television is in Standby mode, press the POWER ( ) button on the remote control. Result: The message Plug & Play is displayed, and then the Language menu is automatically displayed a few seconds later. 2 Select the appropriate language by pressing the … or † button. 3 Press the ENTER ( ) but ...

1 Press the MENU ( ) button. Result: The main menu is displayed. 2 Press the … or † button to select Setup. Result: The options available in the Setup group are displayed. 3 Press the ENTER ( ) button. 4 Press the … or † button to select Miscellaneous. Press the ENTER ( ) button. Result: The options available in the Miscellaneous group are displayed. 5 Press the … or † button to select Plug & Play. Press the ...

depends on your country). Automatically allocated programme numbers may not correspond to actual or desired programme numbers. However you can sort numbers manually and clear any channels you do not wish to watch. 1 Press the MENU ( ) button. Result: The main menu is displayed. 2 Press the … or † button to select Channel. Result: The options available in the Channel group are display ...

You can store up to 100 television channels, including those received via cable networks. When storing channels manually, you can choose: ◆Whether or not to store each of the channels found ◆The programme number of each stored channel which you wish to identify 1 Press the MENU ( ) button. Result: The main menu is displayed. 2 Press the … or † button to select Channel. Result: The options available in the Channel group are ...

following steps. ◆ Press the œ or √button to select Channel. ◆ Press the … or † button to select C (Aerial channel) or S (Cable channel). ◆ Press the √button. ◆ Press the numeric buttons (0~9), … or † button to indicate the desired channel number. ➢ If there is no sound or noise only, try a different sound standard. 9 If you do not know the channel numbers, select the Sear ...