Ford Automobile User Booklet

including photocopying, recording or by any information storage and retrieval system or translation in whole or part is not permitted without written authorization from Ford Motor Company. Ford may change the contents without notice and without incurring obligation. Copyright © 2000 Ford Motor Company Table of ...

rentals and your favorite home videocassettes. It also allows you to plug in and play a variety of standard video games. Please review this user manual to become familiar with the RSES features and controls as well as the very important safety information. SAFETY INFORMATION Read all of the safety and operating instructions before operating the system and retain for future reference. Do n ...

when not in use. Avoid touching auxiliary input jacks with your fingers. Do not blow on them or allow them to get wet or dirty. Do not clean any part of the RSES with benzene, paint thinner or any other solvent. FEDERAL COMMUNICATION COMMISSION (FCC) COMPLIANCE Changes or modifications not approved by Ford Lincoln-Mercury could void user’s authority to operate the equipment. This equipm ...

Moisture in the air will condense in the videocassette player (VCP) under extremely humid conditions or when moving from a cold place to a warm one. Moisture condensation on the tape playback head drum may damage the videocassette and/or drum. If moisture condensation occurs, do not insert a videocassette into the player. If a videocassette is already in the player, remove it. Turn the VCP power ON to dry the moisture bef ...

Features • 4–head stereo hi-fi videocassette player (VCP) • High performance 6.4” flip-down liquid crystal display (LCD) screen with dimmer/brightness control • Rear Seat Entertainment Module (RSEM) with touch controls • Three (3) standard headphone jacks • Headphones (2 sets) • Remote control unit • Video and audio jacks for connecting video games and video equipment* * Auxiliary video or game equipm ...

operation and the POWER button on the VCP will illuminate and continue to flash on and off. A message on the liquid crystal display (LCD) flip-down screen will also appear indicating DEW PLEASE WAIT until the system is dry enough to operate safely. • If the POWER button on the VCP flashes continuously for longer than one hour, and the VCP will not return to normal operation after att ...

1. POWER button Press to turn the VCP ON or OFF. Will flash to indicate the following conditions: • green — high dew situation • red — high heat situation • orange — over voltage situation 2. SPEAKER button Do not press — this button is not functional. Use the / control on the Rear Seat Entertainment Module (RSEM) to enable the radio speakers or headphone mode. Disregard any indications that may appear on t ...

Press to turn videocassette player ON or OFF. 2. DISPLAY button Press to select display of tape counter or tape remainder (by time). 3. AUDIO selector button Press to select a desired audio output, which will be shown on the screen. HI-FI : Hi-Fi audio output. L : Audio output on left channel only. R : Audio output on right channel only. NORM : Normal audio output. MIX : Mixed audio output. 4. AUX button Do not press ...

to toggle between media sources. Disregard any indications that may appear on the liquid crystal display (LCD) screen regarding AUX functionality. The radio display will always indicate in which mode the system is currently operating. 5. INDEX ( ) button Press to reverse direction while searching a program on a videocassette tape. 6. INDEX ( ) button Press to search the beginning of a progra ...

control for instructions.) The need for battery replacement is usually indicated if the remote control only functions at extremely close distances to the entertainment center or not at all. When replacing the battery for the remote, use battery CR2025 and install with correct orientation as indicated on the remote. Description 10 ...

The Rear Seat Entertainment Module (RSEM) allows the rear seat passengers to operate the Rear Seat Entertaiment System (RSES). They can toggle between radio, cassette, CD or CD/DJ media sources when enabled. To enable the RSES and RSEM, simultaneously press the memory preset buttons 3 and 5 on the radio face. When the RSEM controls are enabled, will appear in the radio display. Press the 3 and 5 presets again to disabl ...

will turn off and the rear seat passengers will enter into headphone mode. They are able to listen to their selected media source via headphones and control the volume level. While DUAL PLAY is engaged, the front seat passengers can listen to the desired media source through the radio speakers. 4. VOLUME buttons Press (+) or (−) button to decrease or increase audio volume. When ignition ...

The screen rotates down to view and up into housing to store when not in use. Be sure the screen is latched into the housing when being stored. 1. 6.4” (diagonal) color liquid crystal display (LCD) screen. 2. Screen housing. 3. Dimmer switch. Rotate to increase/decrease the brightness of the screen. Note: On-screen indicators may appear on the LCD flip-down screen regarding the current operating mode of the s ...

will run the battery down. • When the ignition is turned to OFF, the Rear Seat Entertainment System (RSES) is also turned OFF. When the ignition is turned ON, the RSES returns to SINGLE PLAY mode and the last media position. To play a video tape, toggle the MEDIA control on the RSEM to VCP mode. • Do not leave the videocassette in the videocassette player (VCP) ...

wrong position, the protection circuit will automatically eject the cassette. If this occurs, wait a few seconds and insert the cassette again in the correct position. • Once the cassette is completely inserted, close the console cover. • Ensure that the overhead screen is down for viewing. Removing cassette 1. Open the console cover and press the STOP/EJECT button to stop playba ...

• SP (standard play) or EP (extended play) 2. TAPE COUNTER Tape counter provides a reference number. Press the DISPLAY button on the remote control to switch between tape counter and no tape counter. 3. PRESENT TAPE POSITION 4. TAPE STATUS (PLAY/FF/REW/PAUSE) 5. AUDIO OUTPUT • HI-FI: Hi-Fi audio • L: Left audio • R: Right audio • NORM: Normal audio • MIX: Mixed audio 6. CASSETTE INDICATION 7. PROGRAM INDICATION • “MARK” indi ...

press the AUTO button on the remote control to switch OFF automatic tracking. Manually adjust tape tracking with the TRACKING (+) (−) buttons. 5. Press the STOP button to discontinue playback, or press EJECT to remove the cassette. Single play/ Dual play modes Your Rear Seat Entertainment System (RSES) system is equipped with single play and dual play modes. This unique feature a ...

into dual play mode. DUAL PLAY appears in the radio display. The selected media source (AM, FM1, FM2, TAPE, CD, CDDJ, VCP or AUX) will also appear in the radio display with the letters RSC in front of the mode. “RSC” indicates “Rear Seat Control” and identifies the mode being used by the rear seat passengers. Fast-forward or rewind (no picture) 1. With the tape stopped, press the FF or REW button. 2. Fast-forwarding or ...

videotapes. Audio output is muted (no sound) in these Special Effects playback modes. If the videocassette player (VCP) is continuously operated in a Special Effects mode for five minutes or longer, the VCP is automatically turned OFF to protect the tape. Still playback 1. While a tape is playing, press the PAUSE button. 2. The picture freezes to a “still” frame. Frame-to-frame play ...

remote control. 3. Search a desired address (index) for automatic playback of a program. 4. Each time the right button is pressed, the index number increases. Pressing the left button decreases the index number. 5. A maximum of nine programs can be chosen at a time. 6. To discontinue search playback, press the STOP button. Use the INDEX controls to search in a forward or reverse direction. Me ...