TRENDnet TEW-670AP Quick Installation Manual

Version 04.09.2010 English Troubleshooting 1 6 7 1. Before You Start 2. Hardware Installation 2 3. Configure the Access Point 3 Wireless Tip 1 ...

Package Contents System Requirements 1 • • CD-ROM (User’s Guide) • TEW-670AP • Multi-Language Quick Installation Guide Cat. 5 Ethernet cable (1m / 3.2ft) • Power Adapter (12V DC, 2.5A) ? ? A computer with a network adapter properly installed ? A network Switch or Router with an available network LAN port Web Browser: Internet ...

2 3. Verify that the following panel lights are on: Power, WLAN(2.4GHz and 5GHz) and Ethernet. Note: Locate an optimum location for the Access Point. The best place for the Access Point is usually at the center of your wireless network. Please connect the computer configuring the TEW-670AP on the same switch/router. 1. Connect a RJ-4 ...

http://192.168.10.100 in the Address bar, and then press Enter. 3. Configure the Access Point Note: 1. It is recommended that you configure the Access Point from a wired computer. Before the Access Point can be configured, a Static IP address must be assigned to your computer's network adapter in the subnet of 192.168.10.x. S ...

wireless encryption. 2. The examples below are for WPA2-PSK security. If you select WPA-PSK or WPA2-PSK, make sure your wireless adapters support WPA or WPA2. If your wireless adapters do not support WPA or WPA2, then select WEP. 3. For WiFi Protected Setup (WPS) inst ...

13. Wait 14 seconds while the Access Point reboots. 12. Configure the LAN settings to match your network settings and then click Apply. Your Installation is completed Register Your Product To ensure the highest level of customer service and support, please take a moment to register your product Online at: www.trendnet.com/register ...

Windows 7 Windows Vista Windows XP/2000 1. Go into the Control Panel, click Network and Sharing Center, click Change Adapter Settings, right-click the Local Area Connection icon and then click Properties. 1. Go into the Control Panel, click Network and Internet, click Network and Sharing ...

says “The page cannot be displayed.” How can I get into the TEW-670AP's web configuration page? 1. Check your hardware settings again by following the instructions in section 2. 2. Make sure the LAN and WLAN lights are lit. 3. Make sure the TCP/IP settings are c ...

within an environment. Assign your network a unique SSID. Do not use anything that would be identifying like “Smith Family Network”. Choose something that you would easily identify when searching for available wireless networks. Do not turn off th ...