TRENDnet TE100-PCIWA Quick Installation Manual

TRENDnet TRENDware, USA What's Next in Networking TE100-P21 Version 12.14.04 2-port USB 2.0 and 1 port Parallel Print Server Quick Installation Guide Guide d'installation rapide du serveur d'impression à 2 ports USB 2.0 et 1 port parallèle Druckserver mit 2 USB-2.0-Ports und 1 Parallelpo ...

English ...................................................................................................... Troubleshooting ........................................................................................ 1 1 2 3 4 8 11 1. Prepare for Installation ...................................................................... 2. Produ ...

Parallel Print Server. This guide will help you set up your Print Server. Following the installations should be quick and easy. If you run into problems, please refer to the Troubleshooting section. If you need further technical support, please visit www.TRENDNET.com or call technical su ...

The Print Server has a RJ-45 connector, two USB 2.0 slots, and one parallel port. It also has five LEDS that indicate power, network activity, and printer activity. English Parallel Port Power LED Reset Button Power Adapter Connector USB Ports Network LED RJ-45 Connector Printer LEDs ...

1. Power off the Print Server and Printers. 2. Connect the Print Server's printer port to the printers. 3. Connect the RJ45 cable to the LAN port and to your network hub or switch. 4. Plug the AC power adapter into the power connector on the back of the Print Server. 5. Power on the printer. English 2 3 4 ...

2. Click Install Utility. 3. Click Next. 4. Configure the Print Server English NOTE: For MAC Users, change your computers IP address to 192.168.0.X (where X is an available number from 1-253), and enter 192.168.0.1 in your web browser to access the Print Server's Web Utility. For Windows Use ...

8. The utility will detect any available Print Servers on the network. Select the Print Server you need to configure and click Change IP Address. 9. Type in the IP address that applies to your existing network. Type in the Default Gateway (i.e. your router's local IP address). ...

11. Click Show Web Setup. 12. Please take note and write down the Server Name and the Printer Name. If you connected a USB printer to the USB1 slot, use the Printer Name that is by the USB1 heading in the web configuration utility. If you connected a Parallel printer, use the Printer Name that is by the LPT3 heading in the web config ...

1. For Windows 2000/XP, Click Start Control Panel. For Windows 95/98/ME, Click Start Settings Control Panel. 2. Double-Click the Printers and Faxes Icon. 3. Click or Double-Click Add Printer. 4. Click Next. 5. Select Network Printer option and click Next. Note: If you are using Windows 95/98/ ...