Fostex HP-A8 Quick Start Manual
Text of Fostex HP-A8 Quick Start Manual
Quick Start Guide
HP-A8
32-bit DAC headphone amplifier
8289683000
(555373)
Thank you very much for purchasing the HP-A8.
This manual provides the basics of the HP-A8. Read this
before you use the unit for the first time.
: If you connect the HP-A8 to a Windows computer via USB,
you must install the dedicated USB Audio Class 2.0 driver which can be
downloaded from the Fostex website (www.fostex.com).
If you use a Mac computer, you do not need to dow
1) Read these instructions.
Lisez ces instructions.
2) Keep these instructions.
Conservez ces instructions.
3) Heed all warnings.
Respectez tous les avertissements.
4) Follow all instructions.
Suivez toutes les instructions.
5) Do not use this apparatus near water.
Ne pas utiliser cet appareil près de lʼeau.
6) Clean only with dry cloth.
Nettoyer uniquement avec un chiffon sec.
7) Do not block any ventilation openings. Insta
The HP-A8 is a DAC headphone amplifier offering
superb analog and digital circuitry designs. You can
listen to music reproduced by a personal computer
or digital audio device with high quality sound.
• High quality 32-bit DAC (AK4399) and all discrete
analog circuitry headphone amplifier for maxi-
mum sound quality
• Self-developed USB driver up to 32bit/192kHz on
Mac (24bit on Windows)
• Asynchronous mode using high precision TCXO
(
This switch turns on or off the unit.
When the switch is down, the unit is on.
❷[ON] indicator
When the unit is on, this indicator lights in red.
❸[OUTPUT SEL] switch
This switch selects weather analog audio is output
from the [PHONES] (1 and 2) jacks or the [ANALOG
OUT] jacks.
When the switch is up, audio is output from the
[PHONES] (1 and 2) jacks.
When the switch is down, audio is output from the
[ANALOG OUT] jacks.
:Rega
Features and controls
Rear panel
❶[DIGITAL IN - OPTICAL 1] connector
(optical rectangular)
This connector receives an S/PDIF digital audio
signal and is used for connecting to a digital audio
playback device such as a CD player.
To listen to the audio source of this connector, se-
lect “OPT1” by rotating the [INPUT SEL] dial on the
front panel.
❷[DIGITAL IN - OPTICAL 2] connector
(optical rectangular)
This connector receives an S/PDIF digital a
Features and controls Display
❽[ANALOG OUT] (LEFT, RIGHT) connectors
(RCA jack)
These connectors are used to connect to an audio
amplifier, etc.
The audio signal is output from these connectors
when the [OUTPUT SEL] switch on the front panel
is down.
❾[ANALOG IN] (LE
Features and controls ❶[
▲
] key
When the SD card is selected as the audio source,
pressing this key starts playback of the current au-
dio file.
❷[REC] key
(This key does not function with the HP-A8.)
❸[MENU] key
Pressing this key enters the menu mode.
Pressing this key in the menu mode exits the menu
mode.
❹[INPUT SEL] key
This key is used for selecting the audio source (ex-
cept in the menu mode).
It acts the same as the [INPUT SEL] dial
Using the HP-A8
Example 1: Listening to the audio from an external digital audio device
Connecting an external digital audio source
device
Connect an external digital audio source device to
any of the four [DIGITAL IN] connectors ([OPTICAL
1], [OPTICAL 2], [COAXIAL] and [AES/EBU]).
AC IN
SD CARD
USB
RIGHT
LEFT
RIGHT
LEFT
ANALOG OUT
COAXIAL
OPTICAL
DIGITAL OUT
ANALOG IN
AC IN
SD CARD
USB
RIGHT
LEFT
RIGHT
LEFT
ANALOG OUT
COAXIAL
OPTICAL
DIGITAL OUT
ANALO
Using the HP-A8 MENU
MUTE
REC
RC-N1
MENU
MUTE
REC
RC-N1
INPUT
SEL
MENU
INPUT
SEL
MUTE
REC
RC-N1
MENU
INPUT
SEL
MUTE
REC
RC-N1
Selecting the audio source
Select the audio source (input source) by rotating
the [INPUT SEL] dial on the front panel (or using the
[INPUT SEL] key on the remote controller.
You can select from “OPT1”, “OPT2”, “AES/EBU”
and “COX” depending on the connector to which
the source device is connected.
volume
1
2
phone