Tricity Bendix TBWM 1110 Operating & Installation Instructions Manual

moving it. ●It is dangerous to alter the specifications or attempt to modify this product in any way. ●All packing and transit bolts must be removed before use. Serious damage can occur to the product and to property if this is not adhered to. See relevant section in instructions. ●An ...

Important Safety Information 2 Your New Washing Machine 4 Description of the Appliance 5 Detergent dispenser drawer 5 Child safety feature 5 The Control Panel 6-9 Programme information 8 Operating sequence 9-10 Load the laundry 9 Measure out the detergent and the fabric softener 9 Switch the machine on 9 Select the required programme ...

Your new washing machine meets all modern requirements for effective treatment of laundry with low water, energy and detergent consumption. Even small loads are washed “economically” because the amount of water used is regulated automatically according to the load and type of fabric. ●Automatic cooling of the wash water to 60 ...

1 Detergent dispenser drawer 2 Control panel 3 Door opening handle 4 Filter 5 Adjustable feet Detergent dispenser drawer Prewash Main wash Fabric softener Child safety feature This machine incorporates a special child safety feature to prevent small children from being trapped inside the machine. To activate this device, rotate ...

2 Mains-on light This light comes on when the “on/off” button is pressed, and goes out when it is pressed again. 3 “On/Off” button Press this button to switch the machine on. Press it again to switch the machine off. Programme Option buttons Depending on the programme, different functions can be combined. These must be se ...

The machine performs a prewash cycle at 30°C max. The prewash cycle ends with a short spin at 650 r.p.m. in programmes for cottons and synthetics, and with emptying of the water for delicates. This option is not available with the wool/(handwash) programme , soak 30 and mini 30. For use when washing heavily soiled laundry. 7 “extr ...

anticlockwise. Position E in cottons and synthetics sectors corresponds to the ENERGY SAVING programmes and position to “cold wash”. At the end of the programme the selector dial must be turned to position “off” (reset) and the “on/off” button must be pressed to switch the machine off. Functio ...

programme. The machine performs 1 rinse, followed by a final spin at the max. speed, which can be reduced by depressing the “spin” button. “drain” For emptying out the water of the last rinse in programmes with the “rinse hold” option or at the end of the Soak 30 programme. Tu ...

making up the selected programme light on. If your laundry needs a soak time, turn the programme selector dial to “soak 30” and then, before starting a washing cycle, drain the water as described in the “End of Soak 30 programme ” paragraph. 5. Select the “spin” speed or “rinse hold” o ...