Tripp Lite PR Series Owner's Manual

For use In 120VffiO Hz* env1ronmer)ts ( P R ~ . ~ ~ u L ~ ~ ~ . P R ~ . ~ I O , P R ~ Z , 1 PR 15, PR ZT?, PR 25. R 5Q. R 40, R SO, PR 60) I m rr, nc 11) I APPLICATIONS 1 Tripp Lite PR and TL (Trimline) series DC power supplies convert standard 120 Vblt AC (vAC!), 60 Hz. power into regulated 13.8 Volt DC (VDC) power; (12V DC output, nominal). PR and TL series models ...

Place your PR or TL power supply in a well-ventilated location. Note: The unit will generate heat as it operates, especially if used at or near its current output limits. .. ~ WARNING! Hazardous voltages are present inside the unit. DO NOT expose the unit to I rain or moisture. PR and TL models should only be used in a dry, indoor, protected environment. ! Equipment lnstallation (PR models) Place your equipment next t ...

standard ICS (Intermittent Communications Service), limited by heat buildup. This , ,, translates to a 50% duty cycle of 5 minutes ON, 5 minutes OFF. Equivalent heat loading ' would result from 7 minutes ON at 25% load, followed by 3 minutes ON at 100% load. This cyclical-type of loading is similar to the operation of a transceiver. I Make sure the equi ...