Troy-Bilt 1130 Operator's Manual
Text of the manual
Model 1028 Shown
IMPORTANT:
READ SAFETY
RULES
AND INSTRUCTIONS
CAREFULLY
WARNING:
This unit is equipped
with an internal combustion
engine
and should not be used on or near any unimproved
forest-covered,
brush-covered
or grass-covered
land unless the engine's
exhaust system
is equipped
with a s
Important Safe Operation
Practices
Assembling
Your Snow Thrower
Know Your Snow Thrower
Operating Your Snow Thrower
Making Adjustments
Maintaining Your Snow Thrower
Page
Content
Page
3
Servicing Your Snow Thrower
14
5
Trouble Shooting
17
6
Illustrated Parts
18
8
Commercial
Warranty
31
11
Residential
Warranty
32
12
FINDINGMODELNUMBER
Th
Wk]uvlp erosr]qmvrxw]psru_qwvdi%_ _f@rqv/z
k]fk_iqrwir@rzhg/frxg hqgdqjhuvkhshu:rqdo
vdi%_ dqg_ustrsh@
ri Irxuvhddqg_vkhuvlUhdg_qg_r@rz _®I/vv_fJrqv_ vk_p dqxdoehirth
dwhp s_qj_r rshui_hvk]:pdfk]qhlldlxthwcfrp s_ z i_vkhvh_qv_mfJrqv_ d I#_hvx_]qshuvrqdo
l_m_ IZ khq_ rx#:hh#k]uvIp er_ khhg_
z duql_j.
WARNING:
Hqj
H {
5. Neverrunanengineindoorsorinapoorlyventilated
area.Engineexhaustcontainscarbonmonoxide,
an
odorlessanddeadlygas.
6. Donotoperatemachinewhileundertheinfluence
of
alcoholordrugs.
7. Mufflerandenginebecomehotandcancauseaburn.Do
nottouch.
8. Exercise
extremecautionwhenoperating
onorcrossing
gravelsurfaces.Stayalertforhiddenhazardsortraffic.
9. Exercise
caution
Remove screws from the top sides and ends of the
shipping crate.
•
Set panel aside to avoid tire punctures or personal
injury.
•
Remove and discard plastic bag that covers unit.
•
Remove any loose parts included with unit (i.e.,
Operator's Manual, etc.).
•
Roll unit out of crate.
ASSEMBLINGYOURSNOWTHROWER
LooseParts
The augers
If not already attached, unwrap the headlight wire
which is attached to the headlight, beneath the
handle panel. Wind the headlight wire around the
lower right handle until excess slack is remo
can turn the chute directionalcontrol without
interruptingthe snowthrowingprocess.If the auger
controlis engagedalongwith the drivecontrol,the
operatorcan releasethe augercontrol(on the left
handle)andtheaugerswillremainengaged.Release
bothcontrolstostoptheaugersandtrackdrive.
IMPORTANT:
Alwaysreleasedrivecontrolb
The headlight is on whenever the engine is running.
TrackLockLever
The track lock lever is located on the right side of the
snow thrower and is used to select the position of the
auger housing and the method of track operation.
Move
the lever to the right, then forward or backward to one of
the three positions. See Figure 6.
Transport:Raises the fr
•
Rotatechokeknobto FULLchokeposition(cold
enginestart).Ifengineiswarm,placechokeinOFF
positioninsteadofFULL.
•
Pushprimerbuttontwoorthreetimesforcold
enginestart,makingsuretocoverventholein
primerbuttonwhenpushing.DONOTuseprimerto
restartawarmengineafterashortshutdown.
•
Pushstarterbuttontostartengine.
•
Whenenginestarts,releasestarterbutton,and
mov