TRUlink 30535 Operation & User’s Manual

1 Introduction........................................................................................................................... Features............................................................................................................................... System Requirements.......................................................................................................... Package Contents................................................................................................................ Device Overview................................................................................................................... ...

PC’s display capabilities via an available USB port. No need to open your computer case special graphics card – this cable-based adapter uses a simple connection to provide sup secondary monitor. View large spreadsheets over two screens, read email messages an on separate monitors, deliver multi-screen presentations without a second computer, or e graphic design workstation. We recommend that you read this manual thoroughly an future reference. INTRODUCTION ...

™ Supports the multiple display devices on one PC ™ Multi graphics display modes – Primary, Extended, Mirror and Rotation ™ USB 2.0 compliant and Plug-and-Play USB connectivity ™ VGA and DVI outputs compliant FEATURES ...

™ 1.0GHz or higher processor ™ Single Display Setup: 256MB RAM or higher; ™ Multi-Display Setup: 512MB RAM or higher-(Higher memory recommended for optim ™ Available USB 2.0 port ™ Windows 2000 SP4 / Windows XP SP2 / Windows Vista SYSTEM REQUIREMENTS ...

™ USB 2.0 cable ™ DVI to VGA adapter (for VGA capable displays) ™ CD (User Manual, Driver and Utility) ™ Quick Installation Guide PACKAGE CONTENTS ...

™ Do not plug the USB 2.0 to DVI-I Adapter to your PC or Notebook while executing installation program. ™ The AC power adapter is required for the external USB Hub. Please note that the d 6 USB 2.0 to DVI-I Adapters on one PC. ™ Connect the display device to the DVI connector of USB 2.0 to DVI-I Adapter and sw plugging it into an available USB 2.0 port of PC or Notebook. ™ DO NOT reboot the computer until all of USB 2.0 to DVI-I Adapters are installed. Installing the device driver enables your computer’s operating system to recognize the Adapter once it’s connected. Please check your ...

program does not begin automatically, click Start, Run and double click “D:\Setup.exe” ( path of your CD-ROM drive). Step 2 Driver Installation Wizard, click “Next” to continue. DEVICE INSTALLATION ON WINDOWS® 2000/XP ...

terms of the license agreement.” Click “Next” to accept the License Agreement. Step 4 The Microsoft Software Installation Certificate warning dialogue box will be displayed on Windows XP several times. Please select “Continue Anyway” to continue with the device driver installation. This will not affect the device driver installation and the device usage. DEVICE INSTALLATION ON WINDOWS® 2000/XP ...

Step 6 Select “Yes, I want to restart my computer now” and click “Finish” to complete the driver installation. Note: If you are installing multiple USB 2.0 to DVI Adapters select No, I will restart my computer later at this step and refer to page 14 of this manual for further instructions. DEVICE INSTALLATION ON WINDOWS® 2000/XP ...

Adapter and switch it on. Then plug the USB 2.0 to DVI-I Adapter into an available USB PC or Notebook. By default this adapter will set the additional monitor as an “extended de To change the setting of the display output, please refer to Function Description section o Application Diagram DEVICE INSTALLATION ON WINDOWS® 2000/XP ...

“No, not this time” and click “Next” to continue. Step 8 Select “Install the software automatically (Recommended)”. Click “Next” to continue. DEVICE INSTALLATION ON WINDOWS® 2000/XP ...

device driver installation (this may appear several times). This will not affect the device driver installation and the device usage. Step 10 Click “Finish” to exit the Hardware Wizard of the USB 2.0 to DVI-I Adapter and you are now ready to use the product. DEVICE INSTALLATION ON WINDOWS® 2000/XP ...

a. Please select “No, I will restart my computer later.” and click “Finish” to continue the installation of next USB 2.0 to DVI-I Adapter. DEVICE INSTALLATION ON WINDOWS® 2000/XP ...

it on. Then plug the USB 2.0 to DVI-I Adapter into next available USB 2.0 port of your PC c. The Hardware Installation Wizard will appear. Please select “No, not this time” and click “Next” to continue. DEVICE INSTALLATION ON WINDOWS® 2000/XP ...

(Recommended) and click “Next” to continue. e. Please select “Continue Anyway” to continue with the device driver installation. It will not affect the device driver installation and the device usage. DEVICE INSTALLATION ON WINDOWS® 2000/XP ...

2.0 to DVI-I Adapter. g. If you wish to install additional USB 2.0 to DVI-I Adapter, please follow the procedure DEVICE INSTALLATION ON WINDOWS® 2000/XP ...

computer now.” and click “Finish” to complete the driver installation. After you reboot the computer, the extended display will be shown on the display device. DEVICE INSTALLATION ON WINDOWS® 2000/XP ...

Right click “My Computer” → “Properties” → “Hardware” → “Device Manager”. Double click “Display adapters”, and “Universal Serial Bus controllers”. ¾ SINGLE USB 2.0 TO DVI-I ADAPTER INSTALLATION ON THE COMPUTER VERIFYING DEVICE DRIVER INSTALLATION ON WINDOWS® 2000/XP ...