Xantech 29110D Installation Instructions

Text of Xantech 29110D Installation Instructions

Hidden Link™ Shelf Top

Standard IR Receiver INSTALLATION INSTRUCTIONS DESCRIPTION The Hidden Link IR Receiver is a small shelf-top infrared repeater assembly. It includes an IR receiver and a CB12 Connecting Block. The Hidden Link IR Receiver is equipped with a 7-foot cable and a 3.5mm stereo mini plug, which is plugged directly into the “IR RCVR” jack on the CB12. It can also be plugged into the “AUX” or “IR RCVR” jack of other

291’s may also be used where the 7-foot cable is not long enough. Simply

cut off the mini plug, strip the leads and splice them to a 3-conductor extension cable with a terminal block or other means. Then connect the extension cable to the 3-terminal block on the CB12 as shown in the figure below. 3.5mm mini plug Signal Name TIP SIGNAL RING GROUND SLEEVE +12VDC The 3-conductor inter-room cable (24 gauge up to 200’, 22 gauge up to 600�

Then check to see if the Hidden Link IR Receiver operates the

component. • Sometimes interference will cause the red Talk-Back LED on the front of the Hidden Link IR Receiver to blink dimly, intermittently, or continuously. • The Talk-Back Led should only blink when you are sending infrared commands to the Hidden Link IR receiver from a remote control. • It may be necessary to move either the interfering source of the Hidden Link IR Receiver to achie

Xantech Receiver Owners Instructions: