Xantech VCIR-CFL Install Manual

Text of Xantech VCIR-CFL Install Manual

Speakers & Volume Controls

VCIR-CFL INSTALLATION INSTRUCTIONS Fig. 1 The VCIR-CFL VCIR-CFL™ MATCH MAKER™ SPEAKER VOLUME CONTROL WITH IR RECEIVER L+ L– R– R+ L+ L– R– R+ INPUT OUTPUT 4-Conductor 18" Ribbon Cable for IR Receiver. IR Receiver Section Stereo Volume Control Section (auto-former) ® VCIR SPEAKER VOLUME CONTROL WITH IR RECEIVER SYLMAR, CA ™ IR Receiver Photo Diode Dual LED Red-Talkback Green-Status The Model VCIR-CFL is a

Right Channel Jumper

Left Channel Jumper Left Channel Jumper Positions Right Channel Jumper Positions L+ L– R– R+ L+ L– R– R+ INPUT OUTPUT ® VCIR SPEAKER VOLUME CONTROL WITH IR RECEIVER SYLMAR, CA ™ Fig. 2 Jumper Placement For Impedance Matching SPECIFICATIONS – IR RECEIVER SECTION • Infrared carrier frequency bandwidth: 36 kHz to 42 kHz. • IR reception range: Up to 60 feet on axis
Speakers & Volume Controls VCIR-CFL WHEN USING 8 OHM SPEAKERS WHEN USING 4 OHM SPEAKERS Number of Speaker Pairs Used Min. Amp. Impedance S1 S4 1 2 3 4 5 6 7 8 S4 S4 S8 S8 S8 S8 S4 S4 S8 S8 4 Ohms 8 Ohms Number of Speaker Pairs Used S1 S1 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 S4 S4 S4 S4 S4 S4 S8 S8 S8 S8 S8 S8 S8 S8 S1 S4 S4 S4 S8 S8 S8 S8 Min. Amp. Impedance 4 Ohms 8 Ohms 1. Determine the

Xantech VCIR-CFL Fig. 3 Simple One-Zone IR Receiver Connections with STATUS

To 120 V AC (unswitched) 781RG Power Supply 283M Blink-IR™ 283M Blink-IR™ Satellite Receiver VCR 4-Conductor Inter-room Cable (unshielded OK) White Striped Side ("+") 786-00 Power Supply (12V at 10 mA) Plug into Switched AC Outlet on A/V Receiver Add resistor in series with Status line to adjust brightness, if desired. (See text, this page). REMOTE ROOM MAIN ROOM – + 789-44 Co
Speakers & Volume Controls VCIR-CFL 4-Conductor Inter-room Cable (unshielded OK) MAIN ROOM REMOTE ROOM ZONE CONTROL - IR INPUTS +12V GND STATUS IR IN ZONE IR OUTPUTS STATUS +12V GND IR ZPR68-10 Zone Control - IR Inputs section NOTE: It is recommended that you use VCIR-CFL's with a ZPR68-10 only when manual volume control is wanted in 2 or more rooms within a zone. Add resistor in series with Status line, to adjust brightness, if desired. (See text

Fig. 6 VCIR-CFL Mounting Details

L+ L– R– R+ L+ L– R– R+ INPUT OUTPUT Plastic Insert Plate (included) Metal Mounting Plate & IR Receiver (included) Decorator Cover Plate & 2 Screws (not included) Knob (included) 6-32 Screws (2) (included) Wallboard J-Box (new construction) Tabs (4) +12 VDC GND STATUS IR OUT Red Striped Side ® VCIR SPEAKER VOLUME CONTROL WITH IR RECEIVER SYLMAR, CA ™ APPLICATION PRECAUTIONS The VCIR-CF

Xantech Receiver Owners Instructions: