Sanyo CA14SE1(V) Instruction Manual

256 Programmes with Automatic Tuning CA14SE1M CP14SE1M CA14SE1K CP14SE1K CA14SE1(V) CP14SE1(V) CA21CF1(V) CP21CF1(V) CA21CF1M CP21CF1M CA21SE1M CP21SE1M CA21SE1K CP21SE1K CA21SE1(V) CP21SE1(V) CA21VF1 CP21VF1 CA21VF1K CP21VF1K ...

nings and Cautions 2 If the televi- sion is to be built into a compartment or similarly enclosed, the minimum dis- tances must be maintained. Heat build-up can reduce the service life of your televi- sion, and can also be dangerous. Never stand on, lean on or push sud- denly the television or its stand. You should pay special attention to children. Serious injury may result if it should fall. Do not place your television on an unstable cart, stand, shelf or table. Serious injury to an individual, and damage to the television, may result if it should fall. High voltages are used in the operation of this television receiver. Do ...

Contents . . . . . . . . . . . . . . . . . . . . . . . . . 3 Plug & Play . . . . . . . . . . . . . . . . . . . . . . . 3 Front Control . . . . . . . . . . . . . . . . . . . . . 4-5 Remote Control Transmitter . . . . . . . . . . 6 Battery Installation of the Remote Control Transmitter . . . . . . . 6 General Operation Remote Control Operation . . . . . . . . . 7 OFF TIMER . . . . . . . . . . . . . . . . . . . . 8 ON TIMER . . . . . . . . . . . . . . . . . . . . . 8 Colour and Sound System Setting of the Colour System . . . . . . . 8 Setting of the Sound system . . . . . . ...

sponding button on the remote control. Model CA14SE1(V), CP14SE1(V), CA21SE1(V), CP21SE1(V), CA21VF1, CP21VF1, CA21VF1K, CP21VF1K Stand-by and Power Indicator VOLUME TV/AV Selector Audio Input Jack-Right (AV2) MENU TV/AV POWER CH - + L-AUDIO-R VIDEO Remote Control Detector Mains ON/OFF Button Programme UP/DOWN Video Input Jack (AV2) Audio Input Jack-Left (AV2) MENU Model CA21CF1(V), CP21CF1(V) Stand-by and Power Indicator VOLUME TV/AV Selector Audio Input Jack-Right (AV2) Remote Control Detector Mains ON/OFF Button Programme UP/DOWN Vid ...

sponding button on the remote control. Monaural Model Model CA14SE1M, CP14SE1M, CA14SE1K, CP14SE1K, CA21SE1M, CP21SE1M, CA21SE1K, CP21SE1K Stand-by and Power Indicator VOLUME TV/AV Selector MENU TV/AV POWER CH - + AUDIO VIDEO Remote Control Detector Mains ON/OFF Button Programme UP/DOWN Video Input Jack (AV2) Audio Input Jack (AV2) MENU Model CA21CF1M, CP21CF1M Stand-by and Power Indicator VOLUME TV/AV Selector Remote Control Detector Mains ON/OFF Button Programme UP/DOWN Video Input Jack (AV2) Audio Input Jack (AV2) MENU ...

ol Transmitter ransmitter 6 1. Open the battery cover. 2. Install two “AA” 1.5 volt batteries so that the “+” and “-” marks on the batteries match the “+” and “ - ” marks inside the unit. 3. Close the battery cover. Note: Replace the batteries when the TV set is showing the following symptoms: Operation is unsteady or erratic, sometimes the TV set does not work with transmitter. Discharged batteries may leak and damage the unit. The normal life of batteries should be from nine to ten months. -/- - -/- - P P BASS SOUND S. SYS SURROUND A•B PICTURE SWAP CH SCAN TIMER JXPSC TV / AV MENU CH CH Power ON/ ...

Standby/Power-on To switch the TV on and off. For shutting off a power supply completely, Press the Mains ON/OFF button on the front control of TV set. Sound mute To switch the sound from the speakers. The sound changes as follows; normal -> mute ( ). -/- - TIMER Timer To Adjust Timer function OFF-TIMER -> ON TIMER -> ON PROGRAM -/- - Recall/Colour system selector To display the programme information on the screen. It also operates as Colour system selector if the clear picture cannot be obtained even when the broadcasting or AV signal is received. Colour System and Sound System (SIF) coul ...

General Operation /Colour and Sound System ■■If no operation is performed after the TV has been switched on by the ON TIMER, such as if you are not at home, the TV will be auto- matically switched off after approximately 2 hours ■■If the TV is already switched on when the time set for the ON TIMER has been reached, only the programme position will be changed to the set programme position. ■■Cancelling ON TIMER. To cancel the ON TIMER, press the VOLUME ( + or - ) button to set it to “ON 0:00” while the ON TIMER screen is shown. Switching off the TV by pressing the Mains ON/OFF button will also ...

Colour and Sound System / Pictur Picture Adjustment e Adjustment 9 or: BG (5.5MHz) DK (6.5MHz) I (6.0MHz) M (4.5MHz) 2) To enter a sound system selection into the memory, select “MEMORY” and press the VOLUME + or - button. (Semi-Auto or Manual Tuning mode ) Broadcast Transmission System List Area Country Sound System Colour System Middle East Asia Oceania PAL B/G Australia, New Zealand, etc. Union of Arab Emirates, Kuwait, Oman, Qatar, Yemen, Bahrain, etc. Indonesia, Malaysia, Singapore, Thailand,etc. PAL B/G China, etc. PAL D/K Hong kong PAL I Saudi Arabia, Iraq, Iran, Lebanon,etc. B/G SECAM Russian Federation,etc. D/K SE ...

e Adjustment / Audio Adjustment 11 Press the MENU button for MAIN menu display. 22 When “PICTURE” is not selected, select “PICTURE” with the Programme UP or DOWN button. 44 Select desired control by pressing the Programme UP or DOWN button. 33 Press the VOLUME + or - button to display Picture Adjustment menu. 55 Press the VOLUME + or - button to alter settings. ■To return to Main menu, press the ALTERNATE button. ■To return to the normal TV mode, press the MENU button. ( Or will automatically return to the normal TV mode after 20 seconds.) 11 Press the MENU button for MAIN menu dis- play. Audio ...

uning of the Channels 11 Up to 256 broadcast stations in your reception area can be stored in the electronic memory. There are three ways of tuning as follows; 1. Automatic Tuning (the basic way): All receivable channels are automatically tuned in and memorized in consecutive programme position. 2. Semi-Auto Tuning: Use to preset a receivable channel in any desired programme position, e.g. the position with the same number as the channel. 3. Manual Tuning: Manually tune a channel if it cannot be automatically tuned, such as when the signal is poor. 11 Press the MENU button for MAIN menu display. 22 Select “PRESET” by pressin ...

uning of the Channels 12 22 Enter to SEMI-AUTO or MANUAL tuning mode. (Refer to page 11.) 33 Select “POSITION” with the Programme UP or DOWN button. This function can be utilized after Automatic Tuning. For example, to copy a TV channel on pro- gramme position “2” onto programme position “6”; 11 Select programme position “2” . 2 44 Select position “6” with the VOLUME + or - button. 55 Select “MEMORY” by pressing the Programme UP or DOWN button. 77 Press the MENU button to return to normal TV display. 66 Press the VOLUME + or - button to memorize. The two TV channels will now have changed places. Use this ...

uning of the Channels / Setting of the Private Position 66 Press the MENU button to return to normal TV display. 44 Select “SKIP” by pressing the Programme UP or DOWN button,then press the VOLUME + or - button to set SKIP to ON. To cancel Skip Channel function, set to OFF. 55 Select “MEMORY” by pressing the Programme UP or DOWN button, then press the VOLUME + or - button for memory. Any number of channels maybe set as Skip Channels. For example, to set the programme position “15” as the private position. 11 Select programme position “15”. 22 Press and hold the RECALL/COLOUR SYS TEM button for more than 2 second ...

Setting of the OSD Language / Connecting Other Equipment 22 Select “LANGUAGE “ by pressing the pro- gramme UP or DOWN button. 33 Press the VOLUME + or - button for Language menu display. 44 Press the MENU button to return to normal TV display. You may connect the audio and video output terminals of the DVD player or VIDEO recorder to the input terminals of the TV set to enjoy the DVD and VIDEO programs. When the stereo signal is inputted from the right and left audio input terminals, each time the SURROUND button is pressed (or selection of On-screen Menu), surround mode is changed as follow ...

Connecting Other Equipment 15 ■■ When watching a video program input from the AV1 terminal, press the TV/AV button to select AV1. Whenever the TV/AV button is pressed, the mode will change as follows: Colour system setting for AV position is automatically stored in the memory. Each time the RECALL/COLOUR SYSTEM button is pressed, colour system is changed as follow; Depending on the type of video tape or connected AV equipment being used, it may be necessary to select colour system. In this case, press the RECALL/COLOUR SYSTEM button and select a suitable colour system. ■■You can select a TV programme while watching a ...

To Audio Input-L (AV2) To Video Input (AV2) Video/DVD Player ■■To watch the Front AV2 video input picture, select AV2 position by pressing the TV/AV Selector. Connecting Other Equipment Connecting Other Equipment 16 Aerial Socket The AV apparatus can also be connected to the aerial socket of your TV receiver. Presetting to watch the video input 1. Playback the VCR . 2. Tune a VCR playback in programme position that you want. (See Semi-Auto Tuning and Manual Tuning on pages 11.) For further details concerning this connection and adjustment, refer to the operating instructions for the AV equipment. VCR for playback PLAYBACK ■ ...

Aerial Connection / Care and Cleaning e and Cleaning 17 The surface of the cabinet can be damaged if not properly maintained. Many common household aerosol sprays, cleaning agents, solvents and polishes will cause permanent damage to the fine surface. 1. Unplug the power cord before cleaning the Television. 2. Clean the screen with a soft cloth dampened with glass cleaner or warm water. 3. Clean the cabinet with a soft cloth dampened with a mild household detergent and warm water. Dry thoroughly. Note: NEVER spray liquids on the screen because they can run down and drip onto the chassis. This may cause component failure not cove ...

Colour System PAL/SECAM/NTSC4.43/NTSC/PAL-60Hz Sound System B/G, I, D/KK’, M/M Channel Coverage VHF: E2-E12, R1-R12, K1-K9, J1-J12, A2-A13 // 0-11, 5A (AUS), 1-11 (NZ) UHF: 21-69, A14-A69, J13-J62 // 28-69 (AUS) CATV: S1-S41, X, Y, Z, Z+1, Z+2 Audio output (RMS) Model: CA14SE1(V), CP14SE1(V), CA21SE1(V), CP21SE1(V) CA21VF1, CP21VF1, CA21VF1K, CP21VF1K, CA21CF1(V), CP21CF1(V): 5W + 5W Model: CA14SE1M, CP14SE1M, CA14SE1K, CP14SE1K, CA21SE1M, CP21SE1M, CA21CF1M , CP21CF1M, CA21SE1K, CP21SE1K : 2.5W + 2.5W Speakers : 5 cmx 9 cm x 2 pcs (All models) Ext. terminals DVD Video Component: ...

Helpful Hints - Problems/Solutions oblems/Solutions 19 Before requesting service check the following chart. “GHOSTS” Reflections of signals from mountains or high buildings will cause multiple images, called “Ghosts”. These abnormal conditions can be reduced to minimum by repositioning aerial or by installing new one suited for your area. “INTERFERENCE” Interference may be caused by electrical appliances, car ignition systems, etc. This should normally be a temporary condition, but should this interference persist, contact your dealer. The following faults are not caused by the receiver: ●Check aerial connection on back ...