Sanyo PLC-EF12B Owner's Manual

SERVICEABLE PARTS INSIDE EXCEPT LAMP REPLACEMENT. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT. THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING A ...

the product is operated. Read all of the instructions given here and retain them for later use. Unplug this projector from AC power supply before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. Follow all warnings and instructions marked on ...

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, ...

FEATURES AND DESIGN 6 BEFORE OPERATION 23 COMPUTER MODE 36 VIDEO MODE 44 SETTING 48 APPENDIX 50 PREPARATION 7 NAME OF EACH PART OF THE PROJECTOR 7 SETTING-UP THE PROJECTOR 8 CONNECTING THE AC POWER CORD 8 POSITIONING THE PROJECTOR 9 PICTURE LEVEL AND TILT ADJUSTMENT 10 MOVING THE PROJECTOR 10 CONNECTING THE PROJECTOR 11 TERMINAL OF THE PR ...

This Multimedia Projector is designed with the most advanced technology for portability, durability, and ease of use. The projector utilizes built-in multimedia features, a palette of 16.77 million colors, and matrix liquid crystal display (LCD) technology. N Compatibility This projector widely accepts various video and computer input ...

Air blown from the exhaust vent is hot. Observe the following when handling your projector or choosing a location to install it. G Keep heat-sensitive objects away from the exhaust port. G If you set the projector on top of a metallic surface, the surface will become hot because of the hot air exhaust. Be careful when handli ...

This projector uses nominal input voltages of 100-120 V or 200-240 V AC. The projector automatically selects the correct input voltage. It is designed to work with single-phase power systems having a grounded neutral conductor. To reduce the risk of electrical shock, do not plug into any other type of power system. ...

600" 462" 80.7' (24.6 m) 40" 77" 115" 154" 231" 308" 462" 600" 100" 150" 200" 300" 400" POSITIONING THE PROJECTOR ROOM LIGHT G This projector is basically designed to project on a flat projection surface. G This projector can be focused from 4.9' (1.5 m) ~ 80.7' (24.6 m). G Refer to the figure below as an example when po ...

G Do not drop or bump the projector, otherwise damages or malfunctions may result. G When carrying the projector, use a suitable carrying case. G Do not transport the projector by using a courier or transport service in an unsuitable transport case. This may cause damage to the projector. To ...