Sanyo PLC-XC56 - 3100 Manual
Read Online
Read the Sanyo PLC-XC56 - 3100 Manual online using the built-in PDF viewer.
Key Pages of Document
FUNCTIONAL SPECIFICATIONS PLC-XC56 Ver. 1.00 SANYO Electric Co., Ltd DS Company Projector Division ...
1 / 65 - CONTENTS - 1. Overview .........................................................................................................................7 2. Serial Interface Specification .......................................................................................7 2.1 Transfer Specification ...............................................................................................7 2 ...
2 / 65 8.4.9 CF_PROGV Command ................................................................................. 17 8.4.10 CF_NZRED Command................................................................................... 17 8.4.11 CF_IMAGE Command .................................................................................. 18 8.4.12 CF_IMAGEADJ Command ......................................... ...
3 / 65 8.10.1 CF_LANG Command .................................................................................... 31 8.10.2 CF_MENUPOSITION Command ................................................................... 31 8.10.3 CF_INPUTSEARCH Command ...................................................................... 31 8.10.4 CF_AUTOSETUPPCADJ Command .............................................. ...
4 / 65 9.4.3 CR_COLOR Command ................................................................................. 42 9.4.4 CR_TINT Command....................................................................................... 42 9.4.5 CR_SHARP Command .................................................................................. 42 9.4.6 CR_GAMMA Command ............................................ ...
5 / 65 9.9 Lamp Status Read Command ............................................................................ 53 9.9.1 CR_LAMPREPL Command ............................................................................ 53 9.9.2 CR_LAMPH Command ................................................................................. 53 9.9.3 CR_LAMPCORRESPH Command ........................................... ...
6 / 65 9.12.1 CR_STATUS Command ................................................................................. 62 9.12.2 CR_SIGNAL Command ................................................................................ 62 9.12.3 CR_VMUTE Command .................................................................................. 62 9.12.4 CR_FREEZE Command .......................................... ...
7 / 65 1. Overview 1.1 This Functional Specification defines communication functions for PLC-XC56 1.2 Compatible to Firmware Ver. 1.x of the projector. 1.3 Most commands can be used to control projector remotely from PC by RS-232C. Therefore, the commands are defined as Expand Serial Commands. 2. Serial Interface Specification 2.1 Transfer Specification Item Specification Synchronous System Asynchron ...
8 / 65 3. Notes for communication 1. Expand Serial Command is defined as one command / one line that starts with “C” and ends with carriage return (0x0D) 2. There are two types of commands: Functional Execution Command and Status Read Command. - Example of Functional Execution Command:”CF_BRIGHT_032”[CR] - Example of Status Read Command: “CR_RIGHT”[CR] Note) ”_” means a space 3. When ...
9 / 65 5. Functional Execution Command Table 5.1 Image Command Table Execute command Item CF_BRIGHT_%1[CR] Set Brightness value CF_CONT_%1[CR] Set Contrast value CF_COLOR_%1[CR] Set Color value CF_TINT_%1[CR] Set Tint value CF_SHARP_%1[CR] Set Sharpness value CF_GAMMA_%1[CR] Set Gamma value CF_WBAL-R_%1[CR] Set White Balance Red value CF_WBAL-G_%1[CR] Set White Balance Green value CF_WBAL-B_%1[CR] Se ...
10 / 65 5.5 Lamp Command Table Execute command Item CF_LAMPH_%1[CR] Reset total running time of each lamp CF_LAMPMODE_%1[CR] Select Lamp mode CF_LAMPLIFECONTRL_%1[CR] Select Lamp life mode 5.6 Sound Command Table Execute command Item CF_VOLUME_%1[CR] Set Volume value CF_MUTE_%1[CR] Control ON/OFF of Sound Mute 5.7 Setting Command Table Execute command Item CF_LANG_%1[CR] Select language for OSD CF_ME ...
11 / 65 6. Status Read Command Table 6.1 Image Status Read Command Table Status read command Item CR_BRIGHT[CR] Get Brightness value CR_CONT[CR] Get Contrast value CR_COLOR[CR] Get Color value CR_TINT[CR] Get Tint value CR_SHARP[CR] Get Sharpness value CR_GAMMA[CR] Get Gamma value CR_WBAL-R[CR] White Balance Red value CR_WBAL-G[CR] White Balance Green value CR_WBAL-B[CR] White Balance Blue value CR_C ...
12 / 65 CR_HPOS[CR] Get setting status of Horizontal Position 6.6 Lamp Status Read Command Table Status read command Item CR_LAMPREPL[CR] Get the information for Lamp replacement time CR_LAMPH[CR] Get lamp total running time CR_LAMPCORRESPH[CR] Get corresponding lamp use time CR_LAMPMODE[CR] Get Lamp Mode status CR_LAMPSTS[CR] Get lamp lighting status CR_PROJH[CR] Get projector total running time CR_ ...
13 / 65 CR_TEMPFAIL[CR] Get temperature when sensors detect abnormal temperature 7. Error Code Table Error Code Contents ? -When the received data cannot be decoded -Parameter determination error (digit number error, including invalid value, etc.) 101 The function is not available in the selected Mode 102 Selected value is out of range (Not reflected) 103 Command mismatched to Hardware (command for O ...
14 / 65 8. Functional Execution Command 8.1 Format 1. PC issues commands in format as below: Pattern1 : “CF_COMMAND” [CR] Pattern2 : “CF_COMMAND_”%1 [CR] CF_ : Header COMMAND : Character line %1 : Parameter (Character line) _ : Space (To separate COMMAND and Parameter) 2. The projector decodes the received command and when it is ready to receive the next command, it returns the response. “0 ...
15 / 65 8.4 Image Command 8.4.1 CF_BRIGHT Command Command "CF_BRIGHT_%1”[CR] %1 "000~063” --------------- Directly select Brightness setting value "UP” ----------------------- Current Brightness setting value + 1 "DN” ----------------------- Current Brightness setting value – 1 Details Set Brightness value of user control Projector does not save the value set with this command so that it re ...
16 / 65 8.4.5 CF_SHARP Command Command “CF_SHARP_%1”[CR] %1 “000~015” ---------------- Directly select Sharpness setting value “UP” ------------------------ Current Sharpness setting value + 1 “DN” ------------------------ Current Sharpness setting value - 1 Details Set Sharpness value of user control Projector does not save the value set with this command so that it returns its origi ...
17 / 65 8.4.8 CF_COLTEMP Command Command “CF_COLTEMP_%1”[CR] %1 “000” ------ Xlow “001” ------ Low “002” ------ Mid “003” ------ High Details Set Color Temperature. (Available only in the normal Power ON status) The value set by this command will not be saved to the projector. Therefore, when turning into Stanby-mode or ALL is OFF, the value returns to original setting. (The value ...
18 / 65 8.4.11 CF_IMAGE Command Command “CF_IMAGE_%1”[CR] %1 “DYNAMIC” ------ Dynamic (Fixed value to enable projection with a sharp, powerful picture tone) “STAND” ---------- Standard (Image adjust value is set to factory default) “REAL” ------------ Real (Fixed value to display graphic image with natural tone) “CINEMA” -------- Cinema (Fixed value to focus on tone reproduction f ...
19 / 65 8.5 PC Adjust Control Command 8.5.1 CF_FSYNC Command Command “CF_FSYNC_%1”[CR] %1 “0000~0031” --------------- Directly select Fine Sync setting value “UP” -------------------------- Current Fine Sync setting value + 1 “DN” -------------------------- Current Fine Sync setting value - 1 Details Set Fine Sync value of PC signal Projector does not save the value set with this comm ...
Related Devices for Sanyo PLC-XC56 - 3100:
(\ SERVICE MANUAL Microwave oven EM8001”s (Australia) / / L,.,. I PRODUCT CODE NO, 432-314.50 ] L.,,, ,,! See the service manual of EM810FS(WM- 640139) except Installation and maintenance guide for the Sanyo EM800TS Microwave Oven. The manual describes interface navigation, supported accessories, usage procedures.
Operational manual for the Sanyo PLC-XF71 Projector. This documentation explains configuration and device instructions, performance guidelines, operating modes, safety precautions.
FILE NO. Service Manual CONTENTS DVD Video Player PRODUCT CODE No. 137 121 04 REFERENCE No. SM5810468 DVD Mechanism Replacement ................................ Instruction and reference manual for the Sanyo DVD-SL33KR DVD Player. This manual outlines installation steps and device operation tips, technical guidelines, warranty information, component overview.
User instructions for the Sanyo PLC-9000NA Projector. The guide focuses on device overview, wiring setup, operational safety, software updates.
Usage and setup manual for the Sanyo EM-U1000 Microwave Oven. This documentation details procedures for safety guidelines, setup tips, reset instructions.
FILE NO. Service Manual CONTENTS DVD Video Player DVD-SL40 (XE) PRODUCT CODE No. 137 123 05 REFERENCE No. SM5810569 DVD Mechanism Replacement .................. Full technical guide for the Sanyo DVD-SL40 DVD Player. This guide includes device calibration, hardware instructions, safety guidelines, performance guidelines.
AS S STEREO MTS PICTURE PICTURE IN TV screen image / Image de télévision / Imagen de la Pantalla del Televisor © 2001 PhotoDisc, Inc. AS DS31810 “As an ENE User instructions for the Sanyo DS31810 TV. It describes maintenance tasks and connectivity options, network configuration, assembly reference.
* Specification can be altered without notice. D06110603-02 I.S SMR-SU75 Model SMR-SU75 Counter-Top Cooler Ｄｉｍｅｎｓｉｏｎｓ（m User instruction booklet for the Sanyo SMR-SU75 Beverage Dispenser. It explains configuration options and system parameters, service instructions, security instructions, wiring setup.
Projector: Frequently Requested PDF Instructions
n Manual 1 3 Press STANDBY-ON on the projector or on the remote control to put the projector into standby mode. • Disconnect the power cord and unplug the pow Product usage guide for the Eiki AH-55201 Projector. The manual outlines technical specifications and technical guidelines, wiring diagrams, user instructions, troubleshooting guides.
8916 NEW SIDE-LOADING HYBRID FILTER GIVES 2000 HOURS OF PROJECTOR PERFORMANCE %DUCATION 0RESENTATION )NSPIRATION 4 ( % ! , , . % 7 Imag Quick reference guide for the Dukane ImagePro 8916 Projector. It describes step-by-step safety features, security instructions, user preferences, warranty information.
QUICK START GUIDE INSTRUKCJA OBSŁUGI CINEO FOCUS Complete usage guide for the Goclever cineo focus Projector. This documentation outlines troubleshooting, adjustment procedures, safety features, hardware setup.
The Optoma HD25-LV delivers outstanding high-definition 1080p video and graphics with unsurpassed color accuracy and incredibly sharp detail. The Optoma HD25-LV Comprehensive user handbook for the Optoma HD25-LV Projector. The guide outlines procedures for maintenance guidelines, product handling, operating modes.