Sanyo PLC-XT35L Owner's Manual

This projector is designed compact in size and weight. It is easy to carry and installed anywhere you wish to use. ◆ Functionally Rich This projector has many useful functions such as lens shifting, ceiling and rear projection, perpendicular omnidirectional projection, variety of lens options, etc. ◆ Multi-use Remote Control Use the remote control as wired and wireless, or as a PC wireless mouse. Eight remote control codes and s ...

corporation. Features and Design . . . . . . . . . . . . . . . . 2 Table of Contents . . . . . . . . . . . . . . . . . . . 3 To the Owner . . . . . . . . . . . . . . . . . . . . . . 4 Safety Instructions . . . . . . . . . . . . . . . . . 5 Air Circulation 6 In ...

DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE EXCEPT LAMP REPLACEMENT. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT. THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS IN THE OWNER'S MANUAL WITH THIS UNIT. CAUTION RISK OF ELECTRIC SHOCK DO NOT ...

before the product is operated. Read all of the instructions given here and retain them for later use. Unplug this projector from AC power supply before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. Follow all warnings and instructions marked on the projector. For added protection to the projector during a lightning storm, or when it is left unattended and unused f ...

To ensure reliable operation of the product and to protect it from overheating, these openings must not be blocked or covered. CAUTION Hot air is exhausted from the exhaust vent. When using or installing the projector, the following precautions should be taken. – Do not put any flammable object or spray can near the projector, hot air is exhausted from the air vents. – Keep the exhaust vent at lea ...

severe accident or fire hazard. This projector can project the picture in upward, downward, or inclined position in perpendicular direction to the horizontal plane. When installing the projector in upwardly inclined position, install the projector bottom side up. Installing the Projector in Proper Directions ✔Note: • When the image is top/b ...

Replace the lens cap and retract the adjustable feet to prevent damage to the lens and cabinet when carrying. When the projector is not in use for an extended period, put it into a suitable case to protect the projector. CAUTION IN CARRYING OR TRANSPORTING THE PROJECTOR – Do not drop or bump the projector, otherwise damages or malfunctions may result. – When carrying the projector, use a suitable carrying ...

This cord is already fitted with a moulded plug incorporating a fuse, the value of which is indicated on the pin face of the plug. Should the fuse need to be replaced, an ASTA approved BS 1362 fuse must be used of the same rating, marked thus ASA . If the fuse cover is detachable, never use the plug with the cover omitted. If a replacement fuse cover is required, ensure it is of the same colour as that visible on the ...

r Top Controls and Indicators t Maintenance Cover WARNING: For maintenance use only. Do not open. y Lens Cap (for PLC-XT35) !7 !4 !6 !5 !2 !3 CAUTION Hot air is exhausted from the exhaust vent. Do not put heat-sensitive objects near this side. u e r t y Front !0 o q w i ✽ o !1 Infrared Remote Receiver (Back) !2 Terminals and Connectors !3 Lamp Cover !4 Power Cord Connector !5 Optional Parts Attachm ...

Use this connector when controlling a computer with the remote control of the projector. Connect the USB terminal of your computer to this connector with the supplied USB cable (p.20). y S-VIDEO INPUT JACK Connect the S-VIDEO output signal from video equipment to this jack (p.21). i AUDIO 2 JACK Connect the audio output (stereo) signal from a computer or video equipment connected to q to this jack ...

When using the wired remote control, connect the wired remote control to this jack with a remote control cable (not supplied). !2 MONITOR OUTPUT TERMINAL (ANALOG) This terminal outputs the video signal from computer to external video equipment (pp.20, 22). ✽ RESET button A built-in micro processor which controls this unit may occasionally malfunction and need to be reset. This can be done by pressing the RESET button with a pen, which will ...

Lights yellow when the projection lamp reaches its end of life (pp.59, 69). q WARNING TEMP. indicator Blinks red when the internal temperature of the projector exceeds the operating range (pp.61, 68). e ON/STAND-BY button Turn the projector on or off (pp.24–25). r INPUT button Select an input source (pp.34–35). !1 INFO. button Display the input source information (p.28). y POINT ed7 8 (VOLUME +/–) buttons – ...

Turn the projector off (p.25). t ON button Turn the projector on (p.24). y INPUT 1 – 3 buttons Select a input source (INPUT 1 – INPUT 3) (pp.34– 35). u AUTO PC button Automatically adjusts the computer image to its optimum setting (pp.30, 38). i FREEZE button Freeze the picture on the screen (p.30). o Point ed 7 8 ( VOLUME + / – ) buttons – Select an item or adjust the value in the On- Screen Menu (p.26). – Pan the im ...

!6 ZOOM ed buttons Zoom in and out the images (p.30). !5 D.ZOOM button Select the Digital zoom +/- mode and resize the image (p.47). @0 FOCUS button Adjust the focus (p.30). !8 MUTE button Mute the sound (p.29). !4 P-TIMER button Operate the P-timer function (p.31). @1 NO SHOW button Temporarily turn off the image on the screen (p.31). @2 KEYSTONE button Corre ...

adjustable feet. Rotate the adjustable feet and tilt the projector to the proper height; to raise the projector, rotate the both feet clockwise. To lower the projector or to retract the adjustable feet, rotate the both feet counterclockwise. To correct keystone distortion, press the KEYSTONE button on the remote control or select Keystone from the menu (see pages 15, 31, 45). Adjustable Feet Ad ...

control codes prevents interference from other remote controls when several projectors or video equipment next to each other are operated at the same time. Change the remote control code for the projector first before changing that for the remote control. See “Remote control” in the Setting Menu on page 52. Press and hold the MENU and a nu ...

ambient lighting in order to obtain the best image. • All measurements are approximate and may vary from the actual sizes. For projector positioning, see the figures below. The projector should be set perpendicularly to the plane of the screen. 100” 32.8' (10.0m) 22.0' (6.7m) 16.4' (5.0m) 10.8' (3.3m) 3.9' (1.2m) 150” 200” 300” 230� ...

sales dealer for detailed information of the optional lens specifications. Fit the lens to the projector by aligning the red dot on the lens with the red dot of the projector. Remove the lens mount cover. 1 2 Attaching the lens to the projector Slowly turn the lens clockwise until it clicks. Make sure that the lens is fully inserted to the pr ...

Cables used for connection • VGA Cable (HDB 15 pin)* • USB Cable • DVI-Digital Cable • Audio Cables (Mini Plug [stereo] x 2) • BNC Cable (*One cable is supplied; other cables are not supplied with the projector.) External Audio Equipment DVI-Digital cable USB cable Audio cable (stereo) Audio cable (stereo) USB port Audio Output USB AUDIO OUT (stereo) Audio Input Unplug the power cords of both t ...