Scientific Atlanta DPX110 Operation & User’s Manual

CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN AVIS Note to CATV System Installer This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC (Section 54, Part I of the Canadian Electrical Code), that provides guidelines for proper grounding and, in particular, specifies that the CATV cable groun ...

Before cleaning this equipment, unplug it from the electrical outlet. Use a damp cloth to clean this equipment. Do not use a liquid cleaner or an aerosol cleaner. Do not use a magnetic/static cleaning device (dust remover) to clean this equipment. Placement Place this equipment in a location that is close enough to an electrical outl ...

Do not expose this equipment to liquid or moisture. Do not place this equipment on a wet surface. Do not spill liquids on or near this equipment. Lightning and Power Surges Plug your equipment into a surge protector in order to reduce the risk of damage from lightning strikes and power surges. If you are unsure of the type of surge prote ...

items in the carton. The carton should contain the following items: • One WebSTAR™ Cable Modem • One twisted pair Ethernet cable (CAT5/RJ-45) • One USB cable • One ...

System Requirements ............................................. 8 WebSTAR Cable Modem Front Panel ................. 9 WebSTAR Cable Modem Back Panel ................ 10 Connection D ...

You need to set up an Internet access account with your local cable service provider in order to use your cable modem. When you contact your cable service provider, verify the following: • Does the cable service to your home support two-way DOCSIS-compatible cable modem access? If y ...

requirements. Minimum System Requirements for PCs • Personal computer (PC) with a Pentium MMX 133 processor or greater • 32 MB of RAM • Netscape or Internet Explorer • 3.5-in. disk drive or CD-ROM drive Minimum System Requirements for Macintosh • MAC OS 8.51 • 32 M ...

1 Power Illuminates solid green to indicate that power is being applied to the cable modem 2 PC Illuminates solid green to indicate that an Ethernet/USB carrier is present Blinks to indicate that Ethernet/USB data is being transferred 3 Cable Blinks during software upgrade and to indicate cable activity 4 Status ...

Back Panel Connections 1 Cable In F-Connector connects to an active cable signal from your cable service provider 2 USB 12 Mbps USB port connects to the USB port on your PC 3 Ethernet RJ-45 Ethernet port connects to the 10BaseT Ethernet port on your PC 4 Reset Reset-to-Default button CAUTION: ...