Scott 2005 Owner's Manual
Text of Scott 2005 Owner's Manual
> Bicycle Safety
S. 2
> Saddle height
S. 3
> Suspension on Scott mountain bikes
S. 3
> Gears
S. 4
> Adjustment of the Index rear derailleur S. 4
> Adjutment of the front derailleur
S. 5
> Chain maintenance
S. 7
> Operation Rapid Fire Plus system
S. 7
> Brakes
S. 12
> Tires and rims
S. 15
> Maintenance and care
S. 21
> Bicycle care
S. 23
> Trouble shooting
S. 25
> Warranty
S. 26
> Parts of wear and tear
S. 27
> Protocol for handing ov
SUSPENSIONS ON SCOTT BIKES
Congratulations on your purchase of a new Scott bicy-
cle! We are confident that the bicycle will exceed your
expectations for value, performance, and ride quality.
Each frame set and component has been custom speci-
fied and designed to enhance your riding experience.
Whether you are a beginning cyclist, or a seasoned pro..
Scott bicycles will provide endless hours of two-whee-
led fun.
We strongly encourage you to take the t
Introduction on derailleur
The front and the rear derailleur have already been
adjusted by your Scott dealer. Therefore, no readjust-
ment will be necessary to begin with. However, it is
advisable to check the adjustment of the gear change
mechanism regularly.
When the gear lever is fully pushed towards the front,
the chain should be below the smallest or the biggest
sprocket.
When the adjustment of the derailleur is inaccurate, for
example when the cha
1. Mount the front derailleur on the seat tube (without
chain) and turn it in a temporary position,
2. Check that the chain guide does not protrude beyond
the largest chain wheel by more than 2 mm. The
chain guide must not touch the chain wheels,
3. The chain guide must run parallel to the chain
wheels. Check above,
4. Tighten the frame bolt and change to the smallest
gear (smallest chain wheel, larger rear sprocket). In
this position, the chain must al
To change from a small chain wheel to a larger
chain wheel
As is shown in the illustration, when lever A is pressed
to the mid-point of a full stroke, it clicks and there is a
change (of one gear) from a small chain wheel to the
next larger chain wheel.
Example: From the intermediate chain wheel to the lar-
gest chain wheel.
When the lever is pressed the full stroke (position 2),
there is a change from the smallest to the largest chain
wheel.
To change
If the chain is on the largest chain wheel and the largest
sprocket, the chain will rub against the front derailleur
plate. When this occurs, press lever b to the point
where it clicks, this causes the front derailleur to move
slightly towards the smaller chain wheel, thereby elimi-
nating the noise.
TRIMMING (NOISE PREVENTION
MECHANISM)
TRIMMING (NOISE PREVENTION
MECHANISM)
ENGLISH
11
DEUTSCH
FRANÇAIS
OWNER MANUAL 2005
Chain
position
Symptom
Trimming
Brake adjustment general
Your Scott bike is fitted with a reliable and well-func-
tioning braking system, provided the brakes are correct-
ly adjusted. Check by measuring the distance between
the brake shoes and the rim: it should be 1.5 to 2 mm.
Cable connection and adjustment of the (Dual Pivot)
brake
1. et the quick lever to the closed position.
2. Adjust the brake shoe clearance (as shown in the
illustration) and secure the cable with the pinch bolt