Fujitsu fi-6800 Getting Started Manual

This manual describes the preparation required for use of the scanner. Follow the preparation procedures described in this manual. Make sure to read the "Safety Precautions" document provided with the scanner before use. For details about scanner functions and features, basic operation, daily care, consumable replacement and trouble- shooting, refer to the "Operator's Guide" (PDF). The "Operator's Guide" is displayed by clicking [fi-6800] J [Next] J [USER'S GUIDE] J [Operator's Gu ...

tains important information about the safe use of the scanner. Before using the scanner, make sure to read and understand the information provided in the "Safety Precautions" document. Symbols Used in This Manual The following symbols are used in this manual. Installing the Scanner Software The scanner drivers and applications bundled with the scanner are as follows. z TWAIN Driver Conforms to the TWAIN standard. Used when you operate the scanner using TWAIN-compli- ant applications. z ISIS Driver Conforms to the ISIS standard. Used when you operate the scanner using ISIS-compliant ap ...

follows. *1: Scanner Central Admin Agent is not supported. *2: Not supported by Kofax VRS. *3: ScandAll PRO and Scan to Microsoft SharePoint are not supported. *4: QuickScan Pro does not support the Windows® 64-bit version. The following describes how to install the bundled software from the "Setup DVD-ROM" contained in the scanner package. There are two ways to install the bundled software: [INSTALL (Recommended)] which installs all software programs needed to operate the scanner, or [INSTALL (Custom)] which installs selected software programs one at a time. For how to install Adobe® Acrobat®, refer to " ...

on the displayed screen. 4. Click the [INSTALL (Recommended)] button. 5. Install the software, following the on- screen instructions. ■INSTALL (Custom) 1. Perform Steps 1 to 3 in "INSTALL (Recom- mended)" (page 3). 2. Click the [INSTALL (Custom)] button. D The [INSTALL PRODUCTS] screen appears. 3. Click the button of the software to be installed. 4. Install the software, following the on- screen instructions. Repeat Steps 3 and 4 to install other software programs here. Install Adobe® Acrobat® using the following procedure from the "Adobe® Acrobat® DVD-ROM" supplied with the scanner. 1. Insert the ...

2000 and Windows Server® 2008. Installing the Scanner Place the scanner at its installation site. Connecting the Cables The following describes how to connect the cables between the scanner and your computer. 1. Make sure that the computer is turned OFF. 2. Connect the scanner to your computer either with a USB or SCSI cable. The following describes the requirements for connecting with the respective cables. zUSB cable -Be sure to use the USB cable which comes as an accessory with this scanner. -When connecting to an USB hub, use the first stage USB hub that is closest to the computer. If you use the s ...

If the SCSI ID of another SCSI device is set to the same ID, change the scanner's SCSI ID to [0] through [6]. 3. Connect the power cable to the power connector of your scanner and to the power outlet. Test-Scanning Documents Using ScandAll PRO, you can test-scan docu- ments to check if they are scanned correctly. The following describes how to test-scan a document: 1. Turn on the scanner. 1. Press the "I" side of the main power switch on the rear side of the scanner. 2. Press the power button on the front of the scanner. The scanner is turned ON, the power button lights in blue, and the liquid crystal ...

Scanner]. D The [Select Scanner] dialog box appears. 10. Select the scanner you want to use, and then click the [Select] button. Select the scanner model which is connected to your computer. The list of scanner models varies depending on the scanner driver installed. If the connec- tion is via SCSI/USB Connector 2, select [Kofax VRS Scanner]. 11. Click the [Scan] menu J [Scan Settings]. D The [Scan Settings] dialog box appears. 12. Clear the [Save to file] check box. 13. Click the [Scanner Setting] button. D The scanner driver's setup dialog box appears. 14. Configure scanner settings such as the resolution and pap ...

Refer to the contact list on the last page of the "Safety Precautions" document. ...