Quantum DPM 5500 Quick Start Manual

TABLE OF CONTENTS Choosing a Location ..........................1 Rack Space Requirements...............1 Environmental Conditions .............1 Preparing for the Installation ...........2 Providing Necessary Tools ..............2 Taking ESD Precautions ..................2 Unpacking the DPM5500 ...................2 Installing the D ...

2 Preparing for the Installation 0 Before you begin the installation procedure in this section, make the following preparations as described in this section: • Providing Necessary Tools • Taking ESD Precautions Providing Necessary Tools 0 Provide the following tools for unpacking and installing the DPM5500 system: • #1 PHILLIP ...

3 Locating the Mounting Position 0 The DPM5500 system is designed to fit in a standard 19 inch wide rack. It is important to the chassis installation to locate the hole pattern in the rack rails (see figure 2). Figure 2 Rail Hole Pattern WARNING: If the rack is empty at the time of installation, do NOT install the DPM5500 chassis t ...

4 Figure 4 Installing the Chassis Support Brackets 3 Once the rails are secured to the rack, tighten the rail adjustment nuts on each rail. 4 With the support brackets installed, prepare the chassis mounting holes if necessary (see figure 5 for hole location). DX5000 support brackets 10-32 x .50 PHILLIPS screws Clip nuts Figure 5 ...

5 Figure 6 Securing the DPM5500 Chassis to the Rack 7 Install each of the hard drive sleds into the DPM5500 chassis. Ensure each drive is completely installed in the chassis with the drive handle in the closed position (see figure 7). CAUTION: Use ESD procedures when handling the hard drives sleds (see “Taking ESD Precautions” ...

6 DPM5500 Default Configuration 0 The DPM5500 is configured from Quantum with Microsoft Windows Server 2003 and Data Protection Manager loaded on the device. The DPM5500 contains a system motherboard, processor, and a SCSI HBA. Refer to the following username and password to access the system: Username: administrator 0 Password: Qua ...

7 Figure 9 Accessing the DPM5500 4 Click the Start Wizard link to continue the configuration wizard. The Welcome screen displays (see figure 10). Figure 10 Welcome Screen 5 Click Next. The License Agreement screen displays (see figure 11). Start wizard link Next Figure 11 License Agreement 6 You must select I agree with the Terms ...

8 7 The DPM5500 system is configured by default to accept IP addresses from a DHCP server. If you need to change the IP Address, select Use the following IP settings and enter the network information. One of the LAN settings must be configured for the domain server. When you have finished configuring the local area connection settin ...

9 Figure 15 Administrator Account Configuration 16 Enter the administrator information and click Next to continue. This information is used to log into the DPM5500. The DPM Remote Desktop displays (see figure 16). Figure 16 DPM Remote Desktop 17 Enter your username and password to login. 18 Configure DPM per the Microsoft® docume ...

United States of America Quantum Corporation 141 Innovation Drive Irvine, CA 92612 U.S.A. phone 949.856.7800 fax 949.856.7799 European Headquarters Quantum Corporaton 3 Bracknell Beeches Old Bracknell Lane West Bracknell Berkshire RG12 7BW United Kingdom phone +44 1344 353500 fax +44 1344 353510 Asia Pacific Quantum Corporaton 9 Te ...