Seiko 7T85 Instructions Manual
Text of Seiko 7T85 Instructions Manual
DISPLAY & BUTTONS..................................................................................
5
SCREW LOCK TYPE CROWN......................................................................
6
SETTING THE TIME AND
ADJUSTING THE STOPWATCH HAND POSITION.....................................
7
SETTING THE DATE.................
• Hour, minute and small second hands
• Date displayed in numerals
n STOPWATCH
• 100-minute stopwatch in 1/5-second increments, consecutively measurable
up to 300 minutes (5 hours)
The second and minute STOPWATCH hands continue counting after the
10-minute hand reaches 100 minutes. So you can even measure accurate
time up to 109 minutes 59.8 seconds. After that, the minute and 10-minute
STOPWATCH hand
SCREW LOCK TYPE CROWN
u Some models may have a screw-lock mechanism that can securely lock the
crown by screw when they are not being operated.
u Locking the crown will help to prevent any operational errors and enhance
the water resistant quality of the watch.
u It is necessary to unlock the screw lock type crown before operating it.
Once you have finished operating the crown, make sure to relock it.
l How to use the screw lock type crown
1. When the stopwatch is or has been measuring, if the crown is pulled out to the second click, it
will automatically reset the STOPWATCH hands to “ 0”.
2. It is recommended that the hands be set to the time a few minutes ahead of the current time,
taking into consideration the time required to adjust the STOPWATCH hand position if necessary.
3. When setting the hour hand, be sure to check that AM/PM is correctly s
* STOPWATCH 1-minute
hand turns a full circle.
55
50
45
40
35
t
t
l STOPWATCH hands can be readjusted in the following order by pressing
button for 2 seconds or longer.
A
STOPWATCH
1/5-second hand
▲
STOPWATCH
10-minute hand
▲
* STOPWATCH 1/5-sec-
ond hand turns a full
circle.
* STOPWATCH 10-minute
hand turns a full circle.
CROWN
After all the adjustments are completed,
push back in to normal position in
accordance with a t
•
When the STOPWATCH 1-minute hand reaches the 10-minute graduation,
it instantaneously returns to the 0-minute position. At the same time, the
STOPWATCH 10-minute hand advances to the next graduation.
•
When the measurement reaches 110 minutes (or 210 minutes), the
STOPWATCH 10-minute hand instantaneously returns to the 10-minute
position.
•
When the measurement reac