Universal Electronics NAVIGATOR Manual 

Text of the manual

Your Navigator requires four (4) new AAA alkaline

batteries. To install the batteries: 1. On the back of the Navigator, pull back on the tab and lift the battery cover off. 2. Match the + and - marks on the batteries to the + and - marks in the battery case, then insert the batteries. 3. Press the battery cover back into place. 4. Test the unit by pressing

Press CH-. The Navigator’s red light will blink

twice. The CABLE key is now unlocked and ready to be reprogrammed. When you are finished reprogramming the CABLE key, you can then lock in the code. To reprogram the CABLE key: 1. Turn on your Cable Converter. 2. Press CABLE and release. Press and hold SETUP until the Navigator’s red light blinks twic

More Universal Electronics Other Owners Instructions: