Radio Shack 360 Owner's Manual
Text of Radio Shack 360 Owner's Manual
Radio Shack 360 Cat. No. 43-980
OWNER’S MANUAL
Please read before using this equipment.
System 360
Caller ID with Callback
With 100 Caller ID
Memories
43-980.fm Page 1 Monday, August 16, 1999 4:44 PM
This symbol is intended to alert you to the presence of un-
insulated dangerous voltage within the product’s enclosure
that might be of sufficient magnitude to constitute a risk of
electric shock. Do not open the product’s case.
This symbol is intended to inform you that important oper-
ating and maintenance instructions are included in the lit-
erature accompanying this product.
RISK OF ELECTRIC SHOCK.
DO NOT OPEN.
CAUTION: TO REDUCE THE RISK OF
ELE
Your RadioShack System 360 Caller ID with Callback is the
latest in telephone technology. The system displays the call-
er’s telephone number (and name, if available in your area)
and the current date and time, as provided by your local
phone company to Caller ID service subscribers. The sys-
tem’s callback feature lets you dial a caller’s number with
the press of a single button.
The system stores and displays up to 64 single (number
only
Time and Date Display — displays the current time and
date as provided to Caller ID service subscribers by your lo-
cal telephone company.
Message Waiting Indicator — appears when you have re-
ceived a voice mail message (if you subscribe to the mes-
sage waiting service from your local phone company).
Large Liquid Crystal Display — makes it easy to see call-
er information and the current time and date.
Contrast Control — lets you adjust the dis
Note: You need four AAA batteries (not supplied) to power
the System 360.
This system has been tested and found to comply with all
applicable UL and FCC standards.
We recommend you record the system’s serial number
here. The number is on the system’s bottom panel.
Serial Number: _________________________
Important Information:
• To use this system, you must be in an area where Caller
ID service is available, and you must subscribe to the
service.
�
We have designed your System 360 to conform to federal
regulations, and you can connect it to most telephone lines.
However, each Caller ID system (and each device, such as
a telephone or answering machine) that you connect to the
telephone line draws power from the line. We refer to this
power draw as the system’s ringer equivalence number or
REN. The REN is shown on the bottom of the system.
If you use more than one telephone or other
Note: You must not connect your System 360 to:
• Coin-operated systems
• Party-line systems
• Most electronic key telephone systems
In the unlikely event that your System 360 causes problems
on the phone line, the phone company can temporarily dis-
connect your service. If this happens, the phone company at-
tempts to notify you in advance. If advance notice is not
practical, the phone company notifies you as soon as possi-
ble and advises you of y
Radio Shack 360 This system complies with the limits for a Class B device as
specified in Part 15 of FCC Rules. These limits provide rea-
sonable protection against radio and TV interference in a res-
idential area. However, your System 360 might cause TV or
radio interference even when it is operating properly.
To eliminate interference, you can try one or more of the fol-
lowing:
• Reorient or relocate the radio or TV receiving antenna
• Increase the distance betw
Radio Shack 360 Preparation ..................................................................... 11
Installing Batteries/Setup .......................................... 11
Adjusting the Display Contrast ................................. 17
Connecting the System ............................................ 18
Connecting to a Phone ..................................... 18
Connecting to an Answering Machine .............. 19
Mounting the System .............
Care and Maintenance.................................................... 35
Lightning.................................................................... 37
43-980.fm Page 10 Monday, August 16, 1999 4:44 PM
Radio Shack 360 You need four AAA batteries (not supplied) to power the
system. For the longest operation and best performance, we
recommend alkaline batteries, such as RadioShack Cat. No.
23-558.
Cautions:
•
Always use fresh batteries of the required size and
type.
•
Do not mix old and new batteries, different types of bat-
teries
(standard,
alkaline,
or
rechargeable),
or
rechargeable batteries of different capacities.
Follow
1. If you are replacing the batteries, unplug the phone line
and the phone’s cord from the system.
2. Use a Phillips screwdriver
to remove the battery com-
partment screw on the bot-
tom of the system, then
slide the cover off in the
direction of the arrow on
the cover’s door.
3. Insert four fresh AAA bat-
teries into the compart-
ment as indicated by the
polarity symbols (+ and –)
marked inside the com-
partment.
(illustration)
(illustration)
43-
4. Turn the system over so
you can see the display.
After you install batteries,
the system beeps and dis-
plays FA640 REV 1.8
(information about the sys-
tem’s software), then SET
LANGUAGE for a few sec-
onds, then ENGLISH (the
default display language)
appears for about 45 sec-
onds.
5. To select another language,
while ENGLISH appears,
press REVIEW
once to
display French or twice to
display Spanish.
(illustration)
43-980.fm Page 13 Monday, Augus
The display shows ENGLISH again if you press
REVIEW
a third time.
•
If you do not press any key within 45 seconds after
pressing REVIEW
, the module automatically
selects English. Go to Step 7.
6. Press
REVIEW to store
the selected language. The
module beeps, and 000
and SET AREA CODE
(English),
CODIGO
DE
AREA
(Spanish),
or
CHOISIR ZONE (French)
appears.
The
first
0
flashes.
43-980.fm Page 14 Monday, August 16, 1999 4:44 PM
7. Within 45 seconds, repeatedly press REVIEW
until
the first digit of your area code appears, then press
REVIEW to set the digit. The second 0 flashes.
Notes:
•
If you make a mistake while setting the area code,
press DELETE. The cursor moves to the first digit of
the area code. Then repeat Steps 7 and 8 to reset
the area code.
•
If you do not press any key within 45 seconds in this
step or Step 8, the system automatically sets the
area code to 00
The telephone company sends the correct time with
each incoming call, so the correct date and time are
automatically set when the system receives its first call.
9. Replace the battery cover and the screw. If you are
replacing the batteries, reconnect the phone lines.
When
flashes in the upper right corner of the display or
the display dims, replace the batteries.
Cautions:
• Always remove old or weak batteries. Batteries can
leak chemicals that can
ADJUSTING THE DISPLAY CONTRAST
To increase the display contrast, hold down DELETE while
repeatedly pressing REVIEW
.
To decrease the display contrast, hold down DELETE while
repeatedly pressing
REVIEW.
Note: Do not hold down DELETE without also pressing one
of the REVIEW keys. You could accidentally erase the call
memory if you hold down only DELETE.
(illustration)
43-980.fm Page 17 Monday, August 16, 1999 4:44 PM
CONNECTING THE SYSTEM
Connecting to a Phone
1. Disconnect the telephone line cord from the phone and
plug it into the system’s LINE jack.
2. Plug one end of the supplied line cord into the system’s
PHONE jack.
3. Plug the other end of the cord into the phone’s jack.
(illustration)
43-980.fm Page 18 Monday, August 16, 1999 4:44 PM
Connecting to an Answering Machine
1. Disconnect the telephone line cord that connects your
answering machine to your phone from the answering
machine’s jack. Then plug it into the system’s PHONE jack.
2. Plug one end of the supplied line cord into the system’s
LINE jack.
3. Plug the cord’s other end into the answering machine’s
jack.
4. Set your answering machine to answer after two or
more rings. This gives the System 360 time to record
info