Xerox 8400 8400 User Safety

Copyright © 2003 Xerox Corporation. All Rights Reserved. A-1 Your printer and the recommended supplies have been designed and tested to meet strict safety requirements. Attention to the following information will ensure the continued safe operation of your printer. Electrical Safety ■ Use the power cord supplied with your print ...

A-2 If you notice noises or odors that are not associated with your normal print operation: 1. Turn off the printer immediately 2. Disconnect the power cord from the electrical outlet 3. Call an authorized service representative to correct the problem. The power cord is attached to the printer as a plug-in device on the ...

A-3 Printer Supplies ■ Use the supplies specifically designed for your printer. The use of unsuitable materials may cause poor performance and a possible safety hazard. ■ Follow all warnings and instructions marked on, or supplied with, the printer, options and supplies. Caution Use of other than Genuine Xerox Solid ...

A-4 Moving the Printer Caution Parts of the printer may be hot. To avoid personal injury or damage to the printer, allow 30 minutes for it to cool before moving or packing the printer. This allows the ink to solidify. ■ Always allow the printer to cool before it is moved to avoid ink spills which can damage the printe ...

A-5 ■ Always move the printer separately from the lower tray assembly. ■ Failure to repackage the printer properly for shipment can result in damage to the printer not covered by the Xerox warranty, service agreement, or Total Satisfaction Guarantee. Note The Total Satisfaction Guarantee is available in the United S ...