DFI 586STE Operation & User’s Manual

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful in- terference when the equipment is operated in a residential installation. This equipment generates, uses and can radiate r ...

Chapter 1: Introduction............................................................ 5 Features and Specifications .................................................. 6 Package Checklist .............................................................. 8 Chapter 2: Hardware Installation ............................................... 9 Preparing ...

User Password ............................................................49 IDE HDD Auto Detection ................................................49 HDD Low Level Format .................................................52 Save & Exit Setup ......................................... ...

socket, is a Pentium processor-class system board supporting Intel Pentium processors running at 75MHz, 90MHz, 100MHz, 120MHz, 133MHz, 150MHz, 166MHz and 200MHz frequencies. The 586STE also supports Intel Pentium processor with MMX™ technology - 166/ 200MHz, future Intel Pentium� ...

PROCESSOR • Intel Pentium Processor with MMX™ Technology - 166/200MHz • Intel Pentium 75/90/100/120/133/150/166/200MHz • Future Intel Pentium OverDrive processors • Cyrix/IBM 6x86™ & 6x86L P120+/P133+/P150+/P166+ - Linear burst mode supported • AMD-K5 PR75/PR90/PR100/PR120/PR133 CHIPSET • SiS 5571 ...

• PIO Modes 3 and 4 Enhanced IDE (data transfer rate up to 16.6MB/ sec.) • DMA Mode 2 Bus Master IDE (data transfer rate up to 22.2MB/sec.) • Bus mastering reduces CPU utilization during disk transfer • ATAPI IDE CD-ROM supported INTEGRATED I/O • Super I/O controller • Two NS16C550A-compatible high speed UARTs • One SPP/ECP/ ...

• The 586STE system board • The 586STE user’s manual • Serial, mouse and printer port cables Option 1: - One card-edge bracket with a 9-pin and 25-pin serial port cables - One card-edge bracket with a 25-pin printer port cable and a PS/2 mouse port cable Option 2: - One card-edge br ...

into your system unit. It also includes a description of the area in which you must work and directions for memory installation. Before installing the system board, obtain the memory you plan to install. Please refer to the information on pages 14 and 15 fo ...

1. To prevent electrostatic build-up, leave the board in its anti-static bag until you are ready to install it. 2. Wear an antistatic wrist strap. 3. Do all preparation work on a static-free surface with the system board components facing up. 4. Hold the system board by its edges only. Be careful not to touch any of the comp ...