Serene HD 40S Operating Manual

! HIGH DEFINITION AMPLIFIED TELEPHONE Operating Guide HD 40S Manuel de l’utilisateur ...

Read all the instructions before using the appliance. 1. To reduce the risk of injury, close supervision is 2. necessary when an appliance is used near children. Do not contact moving parts or any exposed metal 3. surface. Only use attachments recommended or sold by the 4. manufacturer. Do not use outdoors. Do not use near water, for 5. example, near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet basement or n ...

is anything missing, please contact our Customer Care Department immediately. Note: Use only a class 2 power adapter, 9 vdc, 300 ma OUT VOL. Lo <1 2 3 4> Hi IN VOL. Lo Batt OUT AMPLIFY HD-40S English ...

finished, lift handset to test. If you hear a dial tone, your telephone is ready. If not, check all connections again. Connections ...

1. handset in place when wall mounted. Fit the wall mount bracket into the base of the phone. 2. Connect the short phone cord. Align and put the mounting holes over the heads 3. of the wall plate screws (make sure the screw head protrude enough, if not, use a screw driver to adjust) and slide the phone downward slightly to lock the phone in place. Wall Mounting 1 3 2 ...

IN VOL. Lo Batt OUT AMPLIFY HD-40S 1 2 3 4 5 6 7 8 9 10 11 15 12 13 14 ...

1. One-touch memory dialing buttons. 2. Hold (press to put call on hold and to mute the handset, lift the 3. handset or a quick press of the hook switch releases the Hold). Prog (press to program number into memory). 4. Pause (press this to put a pause in a string of dialing numbers when 5. programming memory dialing; for example, between your long distant service access number and the number you are dialing) Flas ...

Automatically Amplifying Incoming Sound V > . < 3 OUT OL Lo 1 2 4 Hi V IN OL. OUT AM LIFY P HD-40S 2 V > . < 3 OUT OL Lo 1 2 4 Hi V IN OL. O T A I U MPL FY H -40S D 1 Set the Amplifier Auto On/Off switch 1. on the underside to the On position. While on the phone, adjust the Out 2. Volume Control, from 1 (low ) to 4 (high) until the other party can hear you clearly. This only needs to be done the first time you use the p ...

V > . < 3 OUT OL Lo 1 2 4 Hi V IN OL. OUT AM LIFY P HD-40S English Set the Amplifier Auto On/Off to Off. 1. While on the phone, press the Out-going Amplifier 2. button to turn it On. Adjust the Out Volume Control if necessary until 3. the other party can hear you clearly. The Out Amplifier will turn off automatically when 4. you hang-up. 1 3 2 ...

1 3 4 2 Lift the handset, press PROG. 1. Dial the phone number you wish to save (maximum of 15 2. digits). Press PROG again. 3. Press the memory button you wish to store the phone 4. number, then hang up the phone. ...

Cut your photos using the template provided as a guide. Lift the transparent cover of the memory button and insert the photo. Replace the cover when finished. 1 3 2 ...

The phone does not ring or rings very soft when there is an incoming call Check and make sure the ringer volume switch on the side of the phone is set to HI or MED. If this switch is set to LO, the phone rings very soft. No Dial Tone Check and make sure all the phone cords are connected properly and securely. 1. Make ...

original consumer, the HD Phone to be free from defects in materials and workmanship under intended home use. In the event that HD Phone fails to function properly within one year of original purchase due to defects in materials or workmanship, return the unit (freight prepaid) with proof of purchase (sales receipt or packing slip, ...

Rules. On the equipment is a label that contains, among other information, the FCC registration number and ringer equivalence number (REN) for this equipment. If requested; this information must be provided to your telephone company. This equipment uses the following Universal Service Order Codes (“USOC”) jacks: RJ-11. Connection to the telephone network should be made by using standard modular tel ...

off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Modifi ...

13421 Pumice Street Norwalk, Ca. 90650 (562) 407-5400 www.sereneinnovations.com ...