Garmin Nuvi 710 Quick Start Manual

Text of Garmin Nuvi 710 Quick Start Manual

Garmin Nuvi 710 Quick Start Manual

© 2007 Garmin Ltd. or its subsidiaries August 2007 190-00859-01 Rev. C Printed in Taiwan nüvi ® 700 Series personal travel assistant

What’s in the Box?

nüvi GPS device and vehicle suction cup mount. Vehicle power cable to provide external power, or an FM TMC traffic receiver to provide external power and traffic information. USB cable to connect the nüvi to your computer. Your nüvi connects to your computer as a mass storage device. Dashboard disk to mount the suction cup mount on your dashboard. Ways to Charge Your nüvi Use the vehicle power cable. Use the USB cable. Use an opt

Step 1: Mount the nüvi

1. Plug the vehicle power cable into the power connector on the right side of the cradle. 2. Snap the cradle onto the suction cup arm. 3. Clean and dry your windshield and the suction cup with a lint-free cloth. Remove the clear plastic from the suction cup. Place the suction cup on the windshield. 4. Flip the lever back, toward the windshield. 5. Fit the bottom of your nüvi into the cradle. 6. Tilt the nüvi back until it snaps

Step 2: Configure the nüvi

To turn on your nüvi, slide the Power key to the left. Follow the on-screen instructions. Step 3: Acquire Satellites Go outdoors to an open area, out of garages, and away from tall buildings. Stop your vehicle, and turn on the nüvi. Acquiring satellite signals may take a few minutes. The bars indicate GPS satellite strength. When one bar is green, the nüvi has acquired satellite signals. Now you can select a destination a

Viewing the Main Pages

Touch View Map to open the Map page. The vehicle icon shows your current location. Touch the map and drag to view different parts of the map. Touch anywhere on the map; an arrow appears pointing at the object. After you touch Go, the Map page opens. Your route is marked with a magenta line. As you travel, your nüvi guides you to your destination with voice prompts, arrows on the map, and directions at the top of the Map page. A

Adding a Via Point

1. With a route active, touch Menu on the map, and touch Where to. 2. Search for the via point (extra stop). 3. Touch Go. 4. Touch Add as Via Point to add this stop before your destination. Tip: To add more than one stop, edit the current route. Touch Where to > Routes. Using FM TMC Traffic The traffic receiver is included in some nüvi 710, 750T, 760, and 770 packages. If the nüvi is connected to the FM TMC traffic receiver, connect

Pairing Your Phone

1. Confirm that your phone is supported by the nüvi. (See www.garmin.com/bluetooth.) 2. From the Menu page, touch Tools > Settings > Bluetooth. 3. Touch the Add button. 4. Enable your phone’s Bluetooth component and enable Find Me/Discoverable/Visible mode. These settings might be in a Bluetooth, Connections, or Hands-free menu. 5. Touch OK on the nüvi. 6. Select your phone, and touch OK. 7. Enter the nüvi’s Bluetooth PIN (1234)

Garmin Nuvi 710 Loading Files on Your nüvi

Connect the USB cable to the mini-USB connector on the nüvi and to an available USB port on your computer. Your nüvi’s internal memory and SD card appear as removable drives in My Computer on Windows® computers, and as mounted volumes on Mac® computers. Copy and paste files from your computer into the nüvi drives/volumes. When you are finished transferring files, click the Eject icon or drag the volume icon to the Tra

Garmin GPS Owners Instructions: