Garmin GPS 50 Quick Reference Manual

Apollo GX50 Quick Reference Guide Press the indicated key and then turn the LARGE knob to view the pages shown. Turn the SMALL knob for more info when available (diamond shown). Ident, Type, & City/Facility Name Bearing & Dist Map Runways Approaches* Lat/Lon Sunrise/Sunset WPT Comment *when enabled Frequencies Type & Elevation Fuel Press INFO Waypoint Information (INFO) Turn SMALL Knob Press SEL to edit information or to select options. Press ENTER to enter and save information. In the Comm function, ENTER saves the Standby frequency. Press DIRECT-TO to define a direct course from your present position to a selected wa ...

Turn SMALL Knob New Msg 1 . . . New Msg n Turn SMALL Knob Old Msg 1 . . . Old Msg n Messages (MSG) Active FPL FPL #1 . . . FPL #30 Create New FPL Turn LARGE Knob Press FPL Flight Plan (FPL) System (SYS) Misc Sensors Encoding Altimeter Air Data Info Fuel Info Turn LARGE Knob Healthy & Visible Satellites Satellites Used for Fix Satellite Search Status GPS Date & Time GPS Normal Reset Turn LARGE Knob Date/Time Test Display Display Brightness Owner Name Model, SW Ver, S/N Fuel Units Baro Units Turn LARGE Knob Press SYS. Turn LARGE Knob, then press ENTER. System Info GPS Sensor Autonav Time Lat/Lon Units Program Nav Pages M ...

to the “Create New Flight Plan” page and then press ENTER. 2. To enter a new plan name, press SEL. 3. Turn the SMALL knob to select characters. Turn the LARGE knob to move to the next character. 4. Press ENTER when the name is complete. 5. Turn the SMALL knob to start inserting waypoints into the flight plan. At the INS? prompt, press ENTER. 6. Turn the SMALL knob to select the first character. Turn the LARGE knob cw to move to the next character. 7. Use the SMALL and LARGE knobs to select the waypoint name and then press ENTER. 8. The INS? prompt will flash for the next waypoint. Press ENTER and repeat steps 5-7 until ...

Flight Plan Mode and press SEL, or press SEL while in the Nav function. 2. Press ENTER to prepare to load approach waypoints. 3. Turn the SMALL knob to display the available approach choices. 4. Press ENTER to select the displayed approach path. 5. Turn the SMALL knob to display the approach legs. 6. Press NAV to return to Navigation Mode. Approach Setup Summary B. Load Approach Information Load a destination airport. Load a stored Flight Plan, or edit the active Flight Plan. You may also use the DIRECT-TO button to choose a destination. The destination must be an airport that has an established approach capabi ...