Shark UV420 Owner's Manual
Text of the manual
TOLL FREE: 1-800-798-7398
This manual covers model numbers:
UV420 26
TECHNICAL SPECIFICATIONS
Voltage: 120V.
Watts: 1200W
Amps: 10A
Hertz: 60Hz
UV420_26_IB_E_120306_2.indd 2
12-03-06 9:53 AM
Important Safety Instructions
2
Getting Started
4
Using the Vacuum
6
Cleaning with the Vacuum Accessories
7
Emptying the Dust Cup Assembly
8
Proper Care of Your Vacuum
9
Troubleshooting
10
Checking for Blockages
11
Maintenance
12
Warranty and Registration
13
Thank you for
purchasing
the Shark®
Navigator™
Professional.
UV420_2
TOLL FREE: 1-800-798-7398
WARNING:
TO REDUCE THE RISK OF ELECTRIC
SHOCK OR INJURY DO NOT USE
OUTDOORS OR ON WET SURFACES.
WHEN USING YOUR SHARK®
NAVIGATOR™ PROFESSIONAL VACUUM,
BASIC SAFETY PRECAUTIONS SHOULD
ALWAYS BE FOLLOWED, INCLUDING THE
FOLLOWING:
READ ALL INSTRUCTIONS BEFORE
USING YOUR SHARK® NAVIGATOR™
PROFESSIONAL VACUUM.
POLARIZED PLUG:
1. DO NOT use if air flow is restricted; if the air
paths, the hose, or the accessories become
blocked, turn the vacuum cleaner off. Remove
all obstructions before you turn on the
unit again.
2. Keep the end of the hose and accessory
openings away from face and body.
3. Keep cleaning tools and hose suction
opening
TOLL FREE: 1-800-798-7398
WHAT’S IN THE BOX YOU JUST
OPENED:
A Vacuum Body
B Floor Power Nozzle
C Handle Assembly
D Super Stretch Hose
E Cleaning Wand with Handle
F Cleaning Wand
G Pet Hair Power Brush
H Cleaning Attachments
I
16” Crevice Tool*
Getting Started
Your Shark® Navigator™
Professional is easy to
assemble:
1 Lay your vacuum body
11 To carry the vacuum:
With the unit in the standing
position, lift by the Dust Cup
Assembly Handle (carry handle).
CAUTION: When lifting or
carrying, DO NOT press Dust
Cup Assembly release button.
9 Attach the Super Stretch Hose:
a) Snap hose into swivel
connector
b) Route under anti-tip hook
to prevent vacuum from
tipping
c) Ro
TOLL FREE: 1-800-798-7398
Using the Vacuum
Your Shark® Navigator™
Professional Vacuum can be used to
clean bare floors or carpets – with the
click of a switch.
Stand the vacuum into the upright
position.
Plug in the vacuum.
1 Start with the Power Switch in the
“O" - Off position.
2 Place your foot on the Floor Power
Nozzle and pull handle toward
Cleaning with the Vacuum Accessories
Before cleaning with your
accessories:
Stand vacuum into upright position.
Secure Super
Stretch Hose in
the anti-tip hose
hook to prevent
tipping.
Select the “I" - On position for
suction only cleaning.
DO NOT pull vacuum cleaner
around by the hose.
DO NOT overextend the hose.
Vacuum Accessories
Yo
TOLL FREE: 1-800-798-7398
Maintenance
For best results empty the Dust Cup
Assembly after each use, as needed
during prolonged usage or when it
reaches the MAX fill line.
DO NOT OVERFILL.
Turn vacuum off before emptying.
To empty the Dust Cup:
1 Grip carry handle and press
the Dust Cup release button to
remove.
2 Option A: For Quick Empty:
Insert Dust C