RCA 20V500T Operation & User’s Manual

DO NOT OPEN Caution: To reduce the risk of electric shock, do not remove cover (or back). No user serviceable parts inside. Refer servicing to qualifi ed service personnel. This symbol indicates “dangerous voltage“ inside the product that presents a risk of electric shock or personal injury. This symbol indicates important ...

Read before operating equipment 1. Read these instructions. 2. Keep these instructions 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a dry cloth. 7. Do not block any of the ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not ...

Features -------------------------------------------------3 Getting Started Basic Cable TV connection --------------------------------4 Basic Antenna Connection--------------------------------5 Basic TV to VCR Connection ---- ...

is easy. If your Cable TV signal comes directly via a 75ohm coaxial cable, use the following steps: 1 Connect the Cable TV signal to the 75OHM ANTENNA INPUT jack on the rear of the TV. Screw it down tight. 2 Plu ...

the antenna to the 75OHM ANTENNA INPUT jack on the rear of the TV. 1 If your antenna has a round cable (75ohm) on the end, then you are ready to connect it to the TV. Go to the next step. If your antenna has flat twin-lead wire ...

The basic component (VCR, DVD player etc.) to TV connection is described below. For other hookups, refer to your component's instruction manual. 1 Connect a yellow video cable to the VIDEO jack on the front of the TV and to the VIDEO OUT jack on your VCR (or other component). 2 Connect an audio cable to the AUDIO jack on the fro ...

Front View 1. POWER BUTTON Turns the TV on and off. 2. STANDBY (LED INDICATOR) Lights to show AC power is available. 3. SENSOR Receives infra-red signals from the remote. 4. CHANNEL +/- BUTTONS Selects channel numbers. Selects items in the submenus. 5. VOLUME +/- BUTTONS Press to decrease/increase the volume. 6. MENU B ...

1 Remove the battery compartment lid on the rear of the remote. Press in the tab, then lift off the lid. 2 Place two AA batteries in the remote. Be sure the (+) and (-) ends of the batteries line up correctly (as marked inside the battery compartment). 3 Reattach the battery compar ...

TV position, all channles can be selected by using two buttons. For example, to select channel 2, press “0” then “2”. You can also press “2”. For channels 100 and above, press three number buttons of the channel directly. (You can select channels above 69 only if you have Cabl ...