DigiTech RP1000 Owner's Manual

separate collection system for used electronic products in accordance with legislation that requires proper treatment, recovery and recycling. Private household in the 25 member states of the EU, in Switzerland and Norway may return their used electronic products fre ...

Section One - Introduction.............1 Getting Acquainted...........................................................1 Included Items....................................................................1 About the RP1000............................................................1 Preset Mode and Pedalboard Mode........................1 Byp ...

warranty: 1. The warranty registration card must be mailed within ten days after purchase date to validate this warranty. 2. DigiTech warrants this product, when used solely within the U.S., to be free from defects in materials and workmanship under no ...

Getting Acquainted Congratulations on your purchase of the RP1000. The RP1000 Integrated Effects Switching System takes your tone to the next level giving you the control that you need over your external amp and stompboxes while packing in the power of a multi-effects processor. Use the RP1000 to control and spice up your tone wi ...

really useful when you just want to add effects processing to your own core amplifier sound. So basically the RP1000 becomes a straight multi-effects box when you do this, and only Wah, Com- pressor, Distortion, Equalizer, Noise Gate, Chorus ...

This knob adjusts the Gain (distortion) for the selected Amp (not available for Acoustic) and is also used to adjust parameters of other effects in the matrix. The amplifier and cabinets can’t be adjusted when the Amp/Cabinet Bypass button is enabled. Amp Level/Effect Parameter (Knob 5) This knob adjusts the Level (volu ...

Front Panel 1 2 3 4 5 6 7 8 9 10 11 12 13 1. Tap Tempo Footswitch Step on this footswitch repeatedly in time with your music to get the delay to sync up with the music’s rhythm. 2. Stomp Loop Footswitch This footswitch enables and disables the mono stompbox effects loop. 3. Edit Up/Down Buttons These buttons navigate up and ...

These six knobs perform various functions, depending on which mode is currently active and what (if anything) is being edited. The functions are listed below: Tone Library (Knob 1) In Performance mode, this knob selects from a library of preset amp tones. 1. When editing a preset, this knob changes the Amp or Effect model ...

When the Expression row is selected, this knob selects the LFO waveform. LFO 1or 3. LFO 2 must first be selected with Knob 1 for this parameter to be available. Master Volume (Knob 6) In Performance mode, this knob adjusts the output level of the RP1000. 1. When editing a pres ...