Sharp HTSB200 - Sound Bar Speaker Operation Manual

MODEL HT-SB200 OPERATION MANUAL Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read this manual carefully. It will guide you in operating your SHARP product. ...

position, main voltage is still present inside the speaker. When the ON/STAND-BY button is set at STAND-BY position, the speaker may be brought into operation by the remote control. ●This speaker contains no user serviceable parts. Never remove covers unless qualified to do so. This speaker contains dangerous voltages, always remove mains plug from the s ...

Contents Page ■General Information Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Controls and indicators . . . . . . . . . . . . . . . . . . 5 - 7 ■Preparation for Use Speaker preparation . . . . . . . . . . . . . . . . . . . . 8 - 10 Placing the speaker. . . . . . . . . . . . . . . . . . . . . . . . 11 Falling prevention ...

ventilated area and ensure that there is at least 10 cm (4") of free space along the sides and top of the equipment. ●Use the speaker on a firm, level surface free from vibration. ●Keep the speaker away from direct sunlight, strong magnetic fields, excessive dust, humidity and electronic/electrical equipment (home computers, facsimiles, etc. ...

STANDARD SPORT SOUND BAR SYSTEM HT-S8200 SURROUND FUNCTION CINEMA / GAME NEWS ON/STAND-BY 6 7 8 9 10 11 2 3 12 13 13 15 14 14 4 5 1 VOL. ...

2. Cinema/Game Button. . . . . . . . . . . . . . . . . . . . . . . . 15 3. Standard Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 4. Volume Up Button . . . . . . . . . . . . . . . . . . . . . . . . . . 14 5. Subwoofer Level Down Button . . . . . . . . . . . . . . . . 15 6. Volume Down Button . . . . . . . . ...

Speaker preparation Select from three installation methods according to the preferred position. Note: Make sure to unplug the AC power lead before installing the speaker or changing the position. Option 2 Option 1 Using spikes You may choose from the two different spike lengths provided: 25 mm and 30 mm. Nuts (secured on 30 mm spikes) must be used when installing either the 25 mm or 30 mm spikes. The speaker can be leveled by adju ...

Caution: ● Be very careful to prevent the speaker [1.75 kg (3.86 lbs.)] from falling when mounting on the wall. ● Before mounting, check the wall strength. (Do not put on the veneer plaster or whitewashed wall. The speaker may fall.) If unsure, consult a qualified service technician. ● Mounting screws are not supplied. Use appropriate ones. ● Check all wall mount angle screws for looseness. ● Select a good location. If ...

Speaker preparation (continued) ■ Installing the speaker 4 Screw the wall mount angle to the wall as shown in the illustration. (Total screw is 8 pieces) Wall surface Wall mount angle Wall mount angle (screws x 4) (screws x 4) 1 Align the wall mount slot at the speaker to the wall mount angle. 2 Slot the speaker into the wall mount angle. 3 Fix them securely. Wall surface ...

Placing the speaker Installation image: Place the speaker as shown. Notes: ● As the sound from the speaker is omni-directional, you can place the speaker anywhere you like. However, it is recommended to place it as close to the TV as possible. ● The front panel of the speaker is not removable. Caution: D h h i ll i di i h h k i Falling prevention Safety wires (not supplied) are useful to prevent the speaker from falling off th ...

Speaker connections to TVs Caution: Turn off all other equipment before making any connections. Tuner receiving for other audio system ● Placing the aerial near the speaker AC power lead may cause noise pick up. Place the aerial away from the speaker for better reception. Notes: ● To connect to TV, use either LINE IN 1 sockets or AUDIO LINE IN 2 socket only. ● Refer the operation manual of the equipment to be connected. ● ...

AC power connection After checking all the connections have been made correctly, connect the AC power lead to the AC power input socket, then to the wall socket. ■ Using with the AC/DC adaptor Remote control ■ Battery installation 1 Plug the AC power lead into the AC/DC adaptor. 2 Plug the AC/DC adaptor cable into the DC IN socket on the speaker. 3 Plug the AC power lead into a wall socket. The STAND-BY indicator will turn RED ...

Remote control (continued) Caution: ● Do not use rechargeable battery (nickel-cadmium battery, etc.). ● Danger of explosion if battery is incorrectly replaced. ● Replace only with the same or equivalent type. ● Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like. ● Installing the battery incorrectly may cause the speaker to malfunction. Notes concerni ...

Press the VOL + button to increase the volume and the VOL – button to decrease the volume. ■ Preset sound mode Main unit operation: When the SURROUND button is pressed, the current mode setting will light up. To change to a different mode, press the SURROUND button repeatedly until the desired sound mode lights up. Remote control operation: Press a desired sound mode on the remote control. ■ Bass cont ...

calling a service technician. If something is wrong with this product, check the following before calling your authorised SHARP dealer or service centre. ■ General ■ Condensation Sudden temperature changes, storage or operation in an extremely humid environment may cause condensation inside the cabinet or on the transmitter on the remote control. Con ...

Periodically wipe the cabinet with a soft cloth. Caution: ●Do not use chemicals for cleaning (petrol, paint thinner, etc.). It may damage the cabinet finish. ●Do not apply oil to the inside of each component. It may cause malfunctions. Error indicators and warnings When you fail to perform operations properly, the following messages are displayed on the speaker. (*): Should the same message appe ...

reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production speaker. There may be some deviations from these values in individual speaker. ■ General (*) This power consumption value is obtained when in the power stand-by mode. Power sour ...