Ricoh MP7060S Manual
Text of the manual
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and use
Dieser Drucker überschreitet einen Geräuschpegel von 70 dB (A) während
dem Betrieb nicht.
Declaration of Conformity
“The Product complies with the requirements of the EMC Direc-
tive 89/366/EEC and the Low Voltage Directive 73/23/EEC.”
Please take notice that the manufacturer of this equipment does not
offer any warranty against data loss due to inappropriate installation
or handling, or direct or indirect damages.
Please take notice that the manufacturer will bear no responsibility
for direct or indirect damages caused by the use of this product or its
malfunction.
Please take
Obey the following cautions when handling the drive or discs.
Cautions During Installation
• Install the drive in accordance with the specifications. Be careful to
avoid locations likely to cause vibration or shock.
• Avoid locations where there is high humidity, much dust, or poor
ventilation.
• Avoid locations in direct sunli
Cautions Concerning Disc Cleaning
• Remove the disc by pressing the eject button.
• Use compressed air to clear dust from the drive. (Spray the com-
pressed air for about 5 seconds). (See Fig. 1)
• Check to see if there is dirt on the surface of the disc. Be careful not
to touch the disc with the fingers when doing this. (See Fig. 2)
• After cl
Thank you for purchasing the Multimedia Printer Series (Compact Disc
Recorder/ReWriter) MP 7060S series (abbreviated CD-R/RW drive).
Be sure to read this manual carefully before using this product.
This manual explains everything you need to know to operate this product.
Keep it in a safe place and refer to it whenever necessary.
Writing soft
z Ricoh’s original completely sealed door construction provides high
reliability.
z Running OPC*1 gives a uniform writing signal that improves reli-
ability.
z An improved anti-heat design means that no cooling fan is needed.
z Easy-to-use tray model.
z Uses the world standard SCSI II Interface.*2
z Compliant with industry standard Orange Book
MP 7060S Series
1. System environment
This unit can be operated in the system environment explained here.
CPU
166MHz (or faster) Pentium
Memory
Windows 98/95: 32MB or greater.
Windows NT Workstation Ver. 4.0: 32MB or
greater (64MB or more recommended)
Hard disk
Hard disk with average access time of
19msec or less, and data transfer speed of
1,200KB/sec or