Ricoh Aficio AP610 Maintenance Manual
Read Online
Read the Ricoh Aficio AP610 Maintenance Manual online using the built-in PDF viewer.
Key Pages of Document
Copyright © 2004, 2005 1 Maintenance Guide Read This First Trademarks.............................................................................................................3 How to Read This Manual .....................................................................................4 Paper and Other Media Paper and Other Media Supported by This Printer.............................................5 Paper Recommendatio ...
Cleaning the Printer Cautions to Take When Cleaning.......................................................................60 Cleaning the Friction Pad....................................................................................61 Cleaning the Paper Feed Roller..........................................................................6 ...
G1168611A_1.10 Copyright © 2004, 2005 3 Trademarks Microsoft, Windows and Windows NT are registered trademarks of Microsoft Corporation in the United States and/or other countries. IPS-PRINT Printer Language Emulation Copyright© 1999-2000 Oak Technolo- gy, Inc., All rights reserved. Bluetooth® is a registered trademark of Bluetooth-SIG Inc. worldwide. Other product names used herein are for identification purposes only and might be trade ...
4 How to Read This Manual The following set of symbols is used in this manual. This symbol indicates a potentially hazardous situation that might result in death or serious injury when you misuse the machine without following the instructions under this symbol. Be sure to read the instructions, all of which are described in the Safety Information section. This symbol indicates a potentially hazardous situation that might result in minor or ...
5 Paper and Other Media Paper and Other Media Supported by This Printer This section describes the paper size, feed direction, and the maximum amount of paper that can be loaded into each paper tray in this printer. ❒The following symbols and terminology are used to represent the feed direc- tion. ❒Be careful of the paper feed direction. The direction is determined for each pa- per size. ❖Input Paper Sizes (Metr ...
6 • The size is supported and indicated on the tray dial. Be sure to set the pa- per size dial to match the actual paper size loaded in the tray. • The size is supported but not indicated on the tray dial. You should set the tray dial to “p”, and select the paper size with the control panel. • The size is supported but the paper size should be set with the control pan- el. There is no dial on the tray. See p.25 “Loading Pa ...
7 The size is supported, but it should be set as a custom size using the con- trol panel. The supported size may differ depending on the printer language you use. Set as a custom size setting using the control panel. The following sizes are supported: • Bypass Tray: approximately 90 - 305 mm in width, and 148 - 432 mm in length. • Paper Feed Unit (Tray 2/3): approximately 182 - 297 mm in width, and 160 - 432 mm in length. • The ...
8 • The size is supported and indicated on the tray dial. Be sure to set the pa- per size dial to match the actual paper size loaded in the tray. • The size is supported but not indicated on the tray dial. You should set the tray dial to “p”, and select the paper size with the control panel. • The size is supported but the paper size should be set with the control pan- el. There is no dial on the tray. See p.25 “Loading Pa ...
9 • Paper Feed Unit (Tray 2/3): approximately 7.17 - 11.69 inches in width, and 6.3 - 17.01 inches in length. • The size is not supported. ❖Paper weight and number of sheets to be set ❒Check that the top of the stack is not higher than the limit mark inside the tray. ❒The envelope feeder unit requires the installation of the optional paper feed unit. ❖Paper size not supported by both side printing The following paper sizes ...
10 Paper Recommendations Loading Paper ❒Do not use ink-jet printer paper because it may stick to the fusing unit and cause a paper misfeed. ❒When printing on OHP transparencies that have a print side, load them with the print side over on the bypass tray. Not taking this precaution may cause them to stick to the fusing unit and cause misfeeds. ❒Set the paper as described below. • Tray 1: Print side facing down • Bypass Tray: ...
11 Thick Paper OHP transparencies Enabled paper feeding tray Any input tray can be used. Number of sheets that can be set • Tray 1: 500 • Tray 2, Tray 3 (Paper Feed Unit Type 610): 500 • Bypass Tray: 100 ❒Make sure paper is not stacked higher than the upper limit mark (T) inside the tray. Make sure paper is not stacked higher than the paper guides inside the bypass tray. Both-side printing Possible Additional cautions When pri ...
12 Envelopes Paper not supported by this printer Avoid using the following paper as they are not supported by this printer. • Paper meant for an ink-jet printer • Bent, folded, or creased paper • Curled or twisted paper • Torn paper • Wrinkled paper • Damp paper • Paper that is dry enough to emit static electricity Additional cautions • Print speed for OHP transparencies is slower than for plain pa- per. • Due to swi ...
13 • Paper that has already been printed onto, except a preprinted letterhead Malfunctions are especially likely when using paper printed on by other than a laser printer (e.g. monochrome and color copiers, ink-jet printers, etc.) • Special paper, such as thermal paper, aluminum foil, carbon paper and con- ductive paper • Paper whose weight is heavier or lighter than the limitation • Paper with windows, holes, perforations, cu ...
14 ❖Paper A Print area B Feed direction C Approx. 4.2 mm (0.18 inches) D Approx. 4.2 mm (0.18 inches) ❒The print area may vary depending on the paper size, printer language and printer driver settings. ❖Envelope A Print area B Feed direction C Approx. 4.2 mm (0.18 inches) D Approx. 4.2 mm (0.18 inches) ...
15 ❒The print area may vary depending on the paper size, printer language and printer driver settings. ...
16 Loading Paper This describes how to load paper into the paper tray and bypass tray. Loading Paper in Tray 1 and the optional paper feed unit The following example explains loading procedure for the standard paper tray (Tray 1). The same procedure can be used for the optional paper feed unit. ❒Make sure paper is not stacked above the limit mark inside the tray. Misfeeds might occur. ❒Do not put different types of paper in a sing ...
17 C Load paper into the tray with the print side down. ❒Confirm that the top of the stack is not higher than the limit mark inside the tray. ❒Confirm that paper fits under the rear guide. D Lift the front of the tray, and then slide it carefully into the printer until it stops. ❒Do not slide the paper tray in with force. If you do, the front and side guides might move. For more information about type, size and feed direction of ...
18 Changing the paper size ❒Confirm that the setting of the paper size dial matches the paper size and feed direction of the paper in the tray, otherwise the printer might be damaged, or printing problems might occur. The following explanation uses the example of “Tray 1” for the paper tray. A Lift the paper tray slightly, and then pull it out until it stops. Adjust the paper size dial to match the size and feed direction of pap ...
19 D Slide the catches inwards to unlock the tray. E Slide the tray until it stops. F Return the catches to their original positions. ❒Confirm that the catches return to their original positions securely. If they are not locked securely, paper misfeeds might occur. ...
20 G Adjust the rear and side guides to the paper size you want to load. ❒To avoid damage, pinch the paper guides when moving them. H Load paper into the tray with the print side down. ❒Confirm that the top of the stack is not higher than the limit mark inside the tray. ❒Confirm that paper fits under the rear guide. I Lift the front side of the tray, and then place it into the printer. Carefully slide it into the printer until i ...
Related Devices for Ricoh Aficio AP610:
Device setup manual for the Ricoh Aficio SP 8200DN Printer. The guide focuses on specifications, menu navigation, setup validation.
Русский Ελληνικά Türkçe Polski Magyar Čeština Català Svenska Suomi Português Norsk Nederlands Español Dansk Italiano Français Deutsch Eng Service manual for the Ricoh SP C440dn All in One Printer. This guide offers instructions on device reset instructions, control functions, software updates, operating modes.
OPERATOR’S MANUAL RICOH FAX 170 / 180 Type I.......RICOH FAX 180 Type II.....RICOH FAX 170 Please read all of these instructions and keep th Product documentation for the Ricoh 170 / 180 Fax Machine. The document covers wiring setup, connectivity options, assembly reference.
Aficio ® CL3000e with DOT Are you ready to replace inefficient line printers with cost effective laser printing? Would you like to print computer reports anywh Product operation guide for the Ricoh Aficio 400835 Printer. It explains software updates, operating conditions, setup validation, device instructions.
p:+61 (2) 9790 1649f:+61 (2) 9709 5904w:gjsmachinery.com.au5 Wordie Place PADSTOW NSW 2211 AustraliaA.B.N.:84 002 147 846 Printing Equipment | Suppl Service manual for the Ricoh GX e7700N Printer. This documentation provides step-by-step guidance on maintenance guidelines, software installation, device instructions.
Read this manual carefully before you use this machine and keep it handy for future reference. For safe and correct use, be sure to read the Safety Information Device user manual for the Ricoh MP 305+ series All in One Printer. This guide includes installation procedures, configuration options, product maintenance, operating instructions.
For safe and correct use, be sure to read Safety Information before using the machine. For information not found in paper manu- als, see the online manuals avai Practical user guide for the Ricoh P C600 Printer. It describes operating procedures and hardware components, network setup, hardware instructions, testing procedures.
Setup Guide Setup Guide For safe and correct use, be sure to read the Safety Information before using the machine. EN Installationsanleitung Um einen sicheren u Product operation manual for the Ricoh IM 2702 All in One Printer. This guide describes device operation tips, diagnostic information, setup guidelines, maintenance procedures.
Printer: Frequently Requested PDF Instructions
Extracted From Service Manual Product instruction manual for the Lexmark T420 Printer. It provides information on safety and wiring diagrams, reset instructions, setup validation.
ADVANCED USER’S GUIDE MFC-7360N MFC-7460DN MFC-7860DW Not all models are available in all countries. Version 0 UK/IRE/SAF Product operation guide for the Brother MFC-7360N All in One Printer. It explains usage scenarios and device reset instructions, troubleshooting tips, device features.
Dell Photo All-in-One 966 TECHNOLOGY YOU NEED • All-in-One Integration • Print/Copy/Scan/Fax • Advanced photo features VALUE YOU EXPECT • Great performa User handbook for the Dell Photo All-in-One 966 All in One Printer. This manual provides information on installation, setup guidelines, network configuration, device safety checks.
Basic Operation Guide EN - for use without a computer - Pamatdarbības rokasgrāmata LV - lietošanai bez datora - Pagrindinių funkcijų vadovas LT - naudojimu Owner’s manual for the Epson Stylus Office BX625FWD All in One Printer. The document highlights operating procedures and operating guidelines, maintenance guidelines, device calibration, shutdown procedures.