RIDGID R4090 Operator's Manual

tor safety. When properly cared for, it will give you years of rugged, trouble-free performance. WARNING: To reduce the risk of injury, the user must read and understand the operator’s manual before using this product. Thank you for buy ...

TABLE OF CONTENTS INTRODUCTION This product has many features for making its use more pleasant and enjoyable. Safety, performance, and dependability have been given top priority in the design of this product making it easy to maintain and operate.  Introduction................................................................................. ...

GENERAL SAFETY RULES WARNING: Read and understand all instructions. Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury. READ ALL INSTRUCTIONS  KNOW YOUR POWER TOOL. Read the operator’s manual carefully. Learn the saw’s applications and limitations as well as the specific po ...

GENERAL SAFETY RULES  KEEP HANDS AWAY FROM CUTTING AREA. Keep hands away from wheels. Do not reach underneath work or around or over the wheel while wheel is rotating. Do not attempt to remove cut material when wheel is moving.  WHEEL coasts after being turned off.  NEVER USE IN AN EXPLOSIVE ATMOSPHERE. Normal sparking of the motor c ...

 SECURE work firmly against the miter guide or fence.  NEVER stand or have any part of your body in line with the path of the wheel.  NEVER attempt to free a stalled wheel without first turning the saw OFF and disconnecting the saw from the power source.  IF THE POWER SUPPLY CORD IS DAMAGED, it must be replaced only by the manuf ...

Some of the following symbols may be used on this tool. Please study them and learn their meaning. Proper interpreta- tion of these symbols will allow you to operate the tool better and safer. Read Operator’s Manual Safety Alert No Hands SYMBOL NAME DESIGNATION/EXPLANATION Voltage Current Frequency (cycles per second) Time Type of current Rot ...

ELECTRICAL Electrical Connection This tool is powered by a precision built electric motor. It should be connected to a power supply that is 120 V, AC only (normal household current), 60 Hz. Do not operate this tool on direct current (DC). A substantial voltage drop will cause a loss of power and the motor will overheat. If the saw does not oper ...

ELECTRICAL Ground Fault Circuit Interrupter (GFCI) protection should be provided on the circuit(s) or outlet(s) to be used for the tile saw. Outlets are available having built-in GFCI protection and may be used for this measure of safety. If the saw is used with an extension cord, ensure the con- nection of the tool’s power cord and the exten ...

PRODUCT SPECIFICATIONS Wheel Diameter...........................................................10 in. Wheel Arbor............................................................... 5/8 in. Throat Capacity...........................................................17 in. Rip Capacity (tile size).................................................34 in. ...

FEATURES KNOW YOUR tILE saw See Figure 3. The safe use of this product requires an understanding of the information on the tool and in this operator’s manual as well as a knowledge of the project you are attempting. Before use of this product, familiarize yourself with all operating features and safety rules. 10 in. Tile CUTTING wheel - A 10 ...