RME Audio Fireface 800 Operation & User’s Manual

FireWire 800 / 400 Digital I/O System 10 + 16 + 2 Channels Analog / ADAT / SPDIF Interface 24 Bit / 192 kHz Digital Audio 56 x 28 Matrix Router MIDI I/O Stand-Alone Operation MIDI Remote Control Stand-Alone MIDI Controlled Operation TotalMix™ 24 Bit / 192 kHz 9 SyncAlign™ ZLM™ ...

Important Safety Instructions ..................................5 General 1 Introduction ...............................................................8 2 Package Contents.....................................................8 3 System Requirements ..............................................8 4 Brief Description and ...

3 19 Configuring the Fireface 19.1 Settings Dialog – General....................................36 19.2 Clock Modes - Synchronization...........................39 19.3 Limit Bandwidth....................................................40 20 Mac OS X FAQ 20.1 Round about Driver Installation ...........................41 ...

30 TotalMix: The Matrix 30.1 Overview ..............................................................68 30.2 Elements of the Matrix View ................................68 30.3 Usage...................................................................68 30.4 Advantages of the Matrix .....................................6 ...

5 Important Safety Instructions ATTENTION! Do not open chassis – risk of electric shock The unit has non-isolated live parts inside. No user serviceable parts inside. Refer service to qualified service personnel. Mains • The device must be earthed – never use it without proper grounding • Do not use defective power co ...

1. Introduction Thank you for choosing the Fireface 800. This unique audio system is capable of transferring analog and digital audio data directly to a computer from practically any device. The latest Plug and Play technology guarantees a simple installation, even for the inexperienced user. The numerous unique features ...

9 5. First Usage – Quick Start 5.1 Connectors and Front Panel The front of the Fireface 800 features an instrument input, microphone inputs and line inputs with gain pots, a stereo headphone output with volume pot, and several status LEDs. MIDI/I indicates MIDI data received by the MIDI input. MIDI/O indicates MIDI data sen ...

5.2 Quick Start After the driver installation (chapter 10 / 19) connect the TRS-jacks or the XLR connectors with the analog signal source. The input sensitivity of the rear inputs can be changed in the Settings dialog (Input Level), assuring the highest signal to noise ratio will be achieved. Try to achieve an optimum in ...