Roberts R9942 Operating Instructions Manual

Contents Contents ..........................................................................................1 Controls ...........................................................................................2 Headphones ....................................................................................5 Display ............................................................................................6 Battery ......................................... ...

020 8758 0338 (Mon-Fri) Controls 1 2 1. DBB/Mono/Stereo switch 2. LCD display 3. Power button 4. Area/Memo button 5. Preset button 2 3 4 5 ...

7. Lock switch 8. Battery compartment 9. DX/Local switch Controls ...

020 8758 0338 (Mon-Fri) 4 10 11 12 10. Volume control 11. Neck strap attachment point 12. Earphone socket Controls ...

020 8758 0338 (Mon-Fri) 6 C B A D E F G H I A. Area indicator B. Battery indicator C. Dynamic bass boost indicator D. Stereo indicator E. Frequency indicators F. Lock indicator G. Preset number H. Preset indicator I. Auto preset indicator Display ...

sliding it in the direction shown by the arrow. 2. Insert one LR03 (AAA) size battery into the compartment. Ensure that battery is inserted in accordance with the diagram shown on the rear of your radio. 3. Close the battery cover 4. Battery should be replaced when the low battery indicator appears in the display . 5. During battery replacement ensure that the radio is turned off ...

radio. 1. Set the Lock switch located on the right side of your radio to the ‘Lock’ position . The power and all other buttons will be disabled, this will prevent accidental operation when your radio is packed in a suitcase or travel bag . 2. To prevent accidental operation of the controls when your radio is switched on, set the Lock switch to the up ‘Lock’ position, t ...

020 8758 0338 (Mon-Fri) 10 ...

your radio. Aerials The lead connecting earphones to your radio acts as an FM aerial when plugged into the Earphone socket. The lead should be extended as much as possible to increase reception. ...

020 8758 0338 (Mon-Fri) 12 ...

first time, with earphones plugged in, your radio will quickly and automatically preset stations in order based upon their signal strength. The display will flash AUTO PRESET. This feature is especially useful for the traveller who can automatically find all the local stations in any city to which he may travel. The radio will switch off automatically after Auto Preset is c ...

020 8758 0338 (Mon-Fri) 14 ...

button on the earphones for more than 1.5 sec. 2. Press and hold down either the Tuning + or - buttons until the frequency in the display begins to change rapidly. Release the button. Your radio will scan the FM band and stop automatically when it finds a station of sufficient strength. 3. Adjust the Volume control to the required setting. 4. Press and hold down either the Tuning + ...

020 8758 0338 (Mon-Fri) 16 ...

memories on each area giving a total of 18 preset memories. 1. Switch on your radio and tune into the required station using one of the tuning methods previously described. 2. Press the Area/Memo button, the display will flash PRESET 3. Repeatedly press Preset button to select the required memory preset. 4. Press the Area/Memo button to complete setting of the memory prese ...

020 8758 0338 (Mon-Fri) 18 ...

Your radio is equipped with 2 Area memories there are 9 preset memories on each area giving a total of 18 preset memories. 1. Switch on your radio and select the required preset area. 2. Repeatedly press and release the Preset button, to select the required preset 3. Presets may also be selected by repeat pressing of the Remote button on the earphones. Note: Pressing the remote button on the earphones for more than 1.5 seconds wi ...