Sharp EC-S2142 Operation Manual
Text of Sharp EC-S2142 Operation Manual
1 Electric shock could occur if used outdoors or on wet surfaces.
2 Do not leave the unit from unattended when the unit is plugged in. Unplug the unit from the outlet when not in
use and when user servicing.
3 Close attention is necessary when used by or near children. Do not allow to be used as a toy.
4 Use only for intended use as described in this manual. Use only the manufacture's recommended attachments.
5 Never operate this v
Metal telescopic tube
Extension/contraction button
Adjust the length while
sliding the button.
Fitting the brush to the metal
telescopic tube.
Page 4
ASSEMBLING THE VACUUM CLEANER
Name of each section and how to assemble
Accessories
Page
Page 4
Page 7
11
Dust cup
Operating handle
Click
Click
Pages within a frame show the ones where major points are explained.
The hose can turn 360
degrees to prevent
excessive distortion.
Hand control switch
Press to star
Dust disposal warning lamp
Lamp & sound
Indications
Clean the filters.
Red
Fast blinking.
Empty the dust cup.
(Dust disposal
warning indication)
Red
Blinking.
After product operation has finished.
Peeep
Peeep
Peeep
peep, peep
Indication lamp
Lamp & sound
High mode.
Low mode.
Slow-speed blinking.
Blue
Continuous lighting.
The clean
mechanism
is in operation.
Continuous
lighting/Blinking.
Blue
After product operation has finished
Page 4
Basics of use
Hand control switch
Stop
High
Low
Starting the vacuuming
Metal telescopic tube
Regarding the power cord
Finishing the vacuuming operation
High
Low
Stop
Stop
High mode: When you want to vacuum at the maximum suction
power press the High button.
(Blue: Lighting)
Low mode: When you want to reduce noise, or when you want to
release the head from smaller mats, press the Low button.
(Blue: Slow-speed blinking)
Vacuuming operation stops.
Turn the head forward and
hook it on the tab.
For loose hair from pet, etc.
Rubber blade
(Gray)
Supplementary suction tools
Dusting brush
Multi head
Removing the brush
Attaching the brush
Using the brush
Crevice nozzle
Using the head
Attaching the head
Storing the head
“Click”
“Click”
To use it
Turn it in the
direction of
the arrow.
To fold it up
for storage.
Using the nozzle
To operating
handle.
Turn the head backward and
hook it on the tab.
Lin
USING THE VACUUM CLEANER
Various ways to use the cleaning mechanism
When you do not want have automatic operation of the cleaning mechanism
Method 1
Method 2
1
How to set for method 2
When you want to operate the cleaning mechanism manually
Stop
Low
peep, peep
peep
Every time you press
the“Stop”button,
the automatic operation
starts.
In case the product is used just
for a short time, the automatic
operation does not start.
(Blue:Fast-speed blinking
EMPTYING THE DUST CUP
Remove the dust cup from the vacuum cleaner to empty the dust cup
1
2
3
4
“Click”
Page 10
Empty the dust cup over a newspaper, trash box, etc. since the dust is likely to spill out.
Remove the power plug from the outlet and take the
dust cup out of the unit.
Press the cup ejector button.
Lift up the dust cup.
Emptying the dust cup.
Rotate the dust cup handle in the direction of the arrow to open the
bottom lid.
(The screw fin r
When to empty the dust cup
EMPTYING THE DUST CUP
If any foreign objects are tangled in the dust cup
1
2
Empty the dust cup in the following cases. If you continue to use the product without emptying the dust cup, the
dust is likely to accumulate on the cylindrical filter and cause the suction power to be reduced.
When the dust-disposal warning
lamp (Red) is blinking.
(Dust disposal-time indication)
TAKING CARE OF THE PRODUCT
When the dust-disposal warning lamp(Red) and sound indicate
Dust cup (Removing each component)
1
2
Clean of the dust cup set also in the following cases
(Red: Blinking)
peep, peep
Dust
disposal
(Red : Blinking)
Take the following measures
Page 9
11
The filter is blocked up and the suction power has been reduced.
Stop operation and disconnect the power plug.
Empty the dust cup, clean of the cylindrical
filter and the high ef�