Sharper Image SI868 Instructions Manual

Negative-Ion Feature™ SI868 Instructions Read and save these instructions. SI868_ IM_120x120.indd 1 3/31/05 10:55:22 AM ...

Thank you for your purchase of a Sharper Image product. We appreciate your business very much. This item was created by Sharper Image Design, our company’s own product development group. Please accept my personal assurance of your complete satisfaction with this product’s quality and performance. We offer generous return privileges and excellent warranties on all our products. For more than 25 years, The Sharper Image has shared the fun of discovering innovative products that make life better and more enjoy- able. We’ve been in business a long time because we are an exciting place to shop and — just as importantly � ...

Diagram of Parts Control Panel LED Display Rear Grill Release Pillar Base Front Grill Release Rear Grill Release Front Grill WARNING: To reduce the risk of fire, electric shock, or injury when using any electrical appliance, basic precautions should always be followed, including: IMPORTANT: If the fan does not operate, check that the front and rear grills are locked into place. To prevent injury, power is disconnected when the grills are unlocked or removed. • Damaged power cord must only be replaced by qualified service personnel. There are no user-serviceable parts inside the unit. Any at ...

two pillar sections. Make sure the smaller ends are facing the fan, then snap the pillar sections together. Align the pegs of one half of the base with the holes in the other. Assemble the base by sliding the halves together. Guide the power cord through the hole in the base. Align the pegs on the base with the hole at the bottom of the pillar and attach the base to the pillar with the large nut. Attach the pillar and base assembly to the fan and lock them in position by sliding the four latching locks inward. Run the cord through the groove at the bottom of the base. The Fan has five parts. Two tall pieces comprise th ...

not update or change your remote display. For example, if you turn the fan off at the control panel, the remote will still indicate that the fan is on. In this situation, you would need to press POWER on the remote twice to turn the fan back on. MODE Select from three wind simulation patterns: Constant - No fluctuation in wind intensity. Natural - Changes in air flow to simulate natural breezes. Sleep - Gentle and subtle shifts in air flow. Mode Button Fresh Air and Negative Ions One of the distinct differences between “fresh” outdoor air and “stale” indoor air is the b ...

fan. Although there is a temperature readout on the remote itself, the measurement that controls the fan is taken at the fan. This way, if the remote is left in direct sunlight, next to a window and getting a false reading, it will not affect the operation of the fan. The fan stops and starts automatically according to the room temperature as measured at the fan. To activate the fan and display, press POWER. To activate automatic monitoring, press AUTO. To display the set temperature and raise or lower it, press the TEMP + or – button. Once the set temperature is ...

This warranty covers any defects in materials or workmanship, with the exceptions stated below. How Long Coverage Lasts This warranty runs for one year from the date of original purchase. What Is Not Covered This warranty does not cover damage caused by misuse or use other than as intended and described in the product instruction manual, or loss or damage to batteries or removable parts. What The Sharper Image Will Do The Sharper Image will repair any defects in materials or workmanship. In the event repair is not possible, The Sharper Image will either replace this product with one of similar features and price, or refund the full purc ...