ShoreTel BB24 Operation & User’s Manual

Copyright © 1998–2006 by ShoreTel, Inc., Sunnyvale, California, U.S.A. All rights reserved. Printed in the United States of America. Contents of this publication may not be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, without prior written authorization of ShoreTel, Inc. ...

HOW TO ASSOCIATE A BUTTON BOX WITH A PHONE . . . . . . . . . . .6 HOW TO TIE A USER TO A PHONE . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 HOW TO PROGRAM BUTTONS FROM DIRECTOR . . . . . . . . . . . . . . . .10 HOW TO PROGRAM BUTTO ...

the functions associated with the custom buttons on some IP phones and on the button box. This lets the user create shortcuts for operations that would normally require pressing two or three buttons. For example, the action associated with the bottom button on an IP 560 could ...

Before you can program the buttons on a BB24 button box, you must first associate the button box device with a user’s IP 212k, 230, or 560 phone. To create this association using ShoreWare Director, follow the procedure below: Step 1 Launch ShoreWare Director and enter the user ID and password. Then click the Lo ...

Step 5 The MAC address appears in the Name field. If desired, you can rename the device to something that will be easier to remember. Step 6 Verify that the information is correct for the Site, Switch, and other fields, and then in the Assign To drop-down menu, click on the MAC address of the IP phone. (The name of the ...

At this point, you should have successfully associated the button box with an IP phone. If you have not already done so, you may want to associate a user with that same IP phone to ensure that the correct person has access to the new button box. To assign a user to the phone using ShoreWare Director, follow the procedure below: ...

Port - IP Phones drop-down menu, as shown. Step 4 Click Save to store your changes. You are now ready to move on to the next section, which provides information on programming the buttons on your BB24 button box. ...

To configure programmable buttons on the phone of a specific user via ShoreWare Director, follow the procedure below: Step 1 Launch ShoreWare Director and enter the user ID and password. Then click the Login button. Step 2 Click on the Administration link to expand the list (if it has not already been expanded). Step 3 ...