Roland AC-100 Owner's Manual
Text of Roland AC-100 Owner's Manual
Roland AC-100 We’d like to take a moment to thank you for purchasing the Roland AC-100
Acoustic Chorus guitar amplifier. We hope you’ll take the time to thorough-
ly read through this owner’s manual. It will help you fully appreciate all the
great features of the AC-100 and help to ensure that the unit provides you
with years of trouble-free service.
Features
• The AC-100 is optimally designed for both acoustic and electro-acousti
RISK OF ELECTRIC SHOCK
DO NOT OPEN
ATTENTION: RISQUE DE CHOC ELECTRIQUE NE PAS QUVRIR
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within the
product’s enclosure that may be
• Before using this unit, make sure to read the instruc-
tions below, and the Owner's Manual.
.........................................................................................................
• Do not open or perform any internal modifications on
the unit.
.........................................................................................................
• Make sure you always have the unit placed so it is
level and sure to remain sta
Roland AC-100 In addition to the items listed under "IMPORTANT SAFETY
INSTRUCTIONS" and "USING THE UNIT SAFELY" on pages 2 and 3,
please read and observe the following:
Power Supply
• Do not use this unit on the same power circuit with any device that
will generate line noise (such as an electric motor or variable light-
ing system).
• Before connecting this unit to other devices, turn off the power to all
units. This will help prevent malfunctions
MIC/AUX CHANNEL input jacks
These jacks accept connection of an XLR or 1/4" phone jack. The 1/4"
phone jack takes priority if both are connected at the same time.
* The 1/4" phone jack is a dual balanced/unbalanced type. You can use either
type of plug.
2.
GUITAR CHANNEL input jacks
These jacks are for HIGH/PIEZO or LOW/ACTIVE connection,
depending on the output from your guitar.
HIGH/PIEZO :
This jack is for connecting guitars that don’t have a
bu
16. CHORUS INTENSITY
This knob adjusts the depth of the chorus effect. Rotating the knob
clockwise intensifies the effect.
* Rotating this knob during a performance may result in noise. This is not a
reason for concern, however.
17. REVERB LEVEL
Rotating this knob clockwise increases the reverb volume.
* A slight reverb can be heard even when this control is at its minimum set-
ting. If you want to eliminate reverb completely, set the REVERB switch to
�
For the USA
FEDERAL COMMUNICATIONS COMMISSION
RADIO FREQUENCY INTERFERENCE STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance wit
When you need repair service, call your nearest Roland Service Center or authorized Roland distributor in your country as
shown below.
As of April, 18, 1997
ARGENTINA
Instrumentos Musicales S.A.
Florida 638
(1005) Buenos Aires
ARGENTINA
TEL: (01) 394 4029
BRAZIL
Roland Brasil Ltda.
R. Coronel Octaviano da Silveira
203 05522-010
Sao Paulo BRAZIL
TEL: (011) 843 9377
CANADA
Roland Canada Music Ltd.
(Head Office)
5480 Parkwood Way Richmond
B. C., V