Roland DB-700 Owner's Manual

Text of Roland DB-700 Owner's Manual

Thank you, and congratulations on your choice of the Roland DB-700 bass amplifier.

201b Before using this unit, carefully read the sections entitled: “IMPORTANT SAFETY INSTRUCTIONS” (page 2), “USING THE UNIT SAFELY” (page 3), and “IMPORTANT NOTES” (page 5). These sections provide important information concerning the proper operation of the unit. Additionally, in order to feel assured that you have gained a good grasp of every f

IMPORTANT SAFETY INSTRUCTIONS

CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ATTENTION: RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the p

USING THE UNIT SAFELY

USING THE UNIT SAFELY 001 • Before using this unit, make sure to read the instructions below, and the Owner’s Manual. .......................................................................................................... 002a • Do not open or perform any internal modifica- tions on the unit. .......................................................................................................... 003 • Do not attempt to
USING THE UNIT SAFELY 014 • Protect the unit from strong impact. (Do not drop it!) .......................................................................................................... 015 • Do not force the unit’s power-supply cord to share an outlet with an unreasonable number of other devices. Be especially careful when using extension cords—the total power used by all devices you have connected to the extension cord’s outlet must never

In addition to the items listed under “IMPORTANT SAFETY INSTRUCTIONS” and “USING THE UNIT SAFELY”

on pages 2–4, please read and observe the following: Power Supply 301 • Do not use this unit on the same power circuit with any device that will generate line noise (such as an electric motor or variable lighting system). 307 • Before connecting this unit to other devices, turn off the power to all units. This will help prevent

Thanks to FFP technology, this DSP (Digital Signal

Processing) bass amplifier offers superior performance regardless of its compact and lightweight body. - Benefits of FFP Technology 1) FFP technology makes it possible to achieve dynamic, high-powered sound that surpasses the output spec. The Power Injection indicator allows you to monitor the effect. 2) Although the cabinet is compact, the unit is able to deliver a truly pow

Button Names and Functions

Front panel fig. 1 (control panel) 1. Control Buttons You can store the settings of the controls in memory A or memory B. For more information, take a look at “The Memory Function” (p. 11). MANUAL Button To play sounds in a way that faithfully reflects the control settings, press this button to make the indicator light up (the Manual function). You can use a foot switch to switch the Manual function on and off. MEMORY A and
Button Names and Functions 6. D-Chorus Thanks to dynamic band-splitting processing according to input signals, you can perform with a chorus effect with no loss in bass-range response. INTENSITY Knob This adjusts the amount of chorus that’s applied. When you don’t want to use a chorus effect, set this to “Off” (the indicator goes dark). If you want to obtain a longer pre-delay effect, set this to a value of 7 or more. You can use a foot switch to
Button Names and Functions 11. Foot Switch By connecting a foot switch such as the FS-5L (sold separately), you can control a variety of such as with your feet. TIP:A/B and RING:MANUAL Jack You can use a foot switch to switch between memory A and memory B or switch the Manual function on and off. fig. 3 (explanatory figure) TIP: Switches between memory A and memory B. RING: This switches the Manual function on and off. When switched off, the settings of

Roland DB-700 Connect your DB-700

Refer to the following diagram and connect the DB-700 to the external eqipment you are using. fig. 5 (connection with an external instrument) * To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and turn off the power on all devices before making any connections. * The pin assignment for the XLR type connectors is as shown below. Before making any connections, make sure that this pin assig

The Memory Function

Calling Up Memory 1. Press the MEMORY A or MEMORY B button to choose the memory you want. For more on the factory-default settings for memory A and memory B, see “Factory-default Settings” (p. 13). You can also choose a memory using the foot switch. When doing so, however, be aware that the MEMORY A and MEMORY B buttons do not function. Changing the Settings for Memory A and Memory B (Edit) 1. Press the MEMORY A or MEMORY B butto

How to handle the Casters

Attaching and Removing the Casters You can attach or remove casters as shown in the following figure. Be sure to remove all casters when accidental movement may be dangerous such as when setting up the DB-700 on stage or when transporting it in a vehicle. If casters have been attached to the amp, make sure it is used only on a stable, level surface. • Attaching all of the casters can make it easier to move the amplifier. (Usa

fig. 7 (block diagram of jack locations)

Factory-default Settings Memory A: Slap Bass Typical slap sound used in studios. Adjust the COMPRESSION knob to your taste. fig. 8 (setting 1) Memory B: Rock Drive Heavy rock sound. The amount of distortion can be adjusted with the GAIN knob. fig. 9 (setting 2) Returning to the Factory-default Settings To return the settings in memory A and B to their factory defaults, while holding down

In addition to the default settings, the following sample settings (which are geared toward specific styles of playing) are also

provided. Once you call up the following sample settings, any settings you’ve stored at Memory A and B will be lost. Sample 1 Hold down the MEMORY A button while you switch on the power. Then, select either the MEMORY A button or the MEMORY B button. MEMORY A: Rock Bass Standard rock sound. The amou

Roland DB-700 Hold down the MEMORY B button while you switch on the power. Then, select either the MEMORY A button or the

MEMORY B button. MEMORY A: Chorus Bass Transparent chorus sound suited for slapping or flat-picking. The modulation amount can be controlled with the D-CHORUS INTENSITY knob. fig.12 MEMORY B: Overdrive Bass Wildly over-driven sound of the seventies. Great for flat-picking. The edge of the picking can be adjusted with the TREBLE

Rated Power Output

250 W / 8 ohms Nominal Input Level (@1KHz) INPUT HIGH -30 dBm/1 M ohms INPUT LOW -20 dBm/300 k ohms (AMP TYPE: SOLID STATE) INSERT RETURN +4 dBm Nominal Output Level BALANCED DI +4 dBm INSERT SEND +4 dBm LINE OUT (XLR type) +4 dBm LINE OUT (PHONE type) +4 dBm * 0 dBm=0.775 Vrms Speakers 38 cm (15 inches) X 1 Horn Tweeter X 1 Memory A, B (2 memories) Controls AMPLIFIER - TYPE Switch (3 types) - GAIN Knob - VOL

When you need repair service, call your nearest Roland Service Center or authorized Roland distributor in your country as

shown below. As of June 11, 1999 ARGENTINA Instrumentos Musicales S.A. Florida 656 2nd Floor Office Number 206A Buenos Aires ARGENTINA, CP1005 TEL: (54-11) 4- 393-6057 BRAZIL Roland Brasil Ltda. R. Coronel Octaviano da Silveira 203 05522-010 Sao Paulo BRAZIL TEL: (011) 3743 9377 CANADA Roland Canada Music Ltd. (Head Office)

Roland Amplifier Owners Instructions: