Silvercrest KH 6521 Operating Instructions Manual

www.kompernass.com ID-Nr.: KH6521/22 - 07/09-V4 DVD PLAYER KH 6522 KH 6521 4A DVD Player Operating instructions DVD-lejátszó Használati utasítás CV_KH6521_22_35274_75_LB4A 18.08.2009 13:26 Uhr Seite 1 ...

f g h j k l ; 2@ 2# B a s d 2) 2! C q d a i l o ; 2* 2@ 2! f 3# 3$ 3@ 2& 2( s 2) j k 2$ 2# g h 2^ 2% y u 3) e r t w 3! CV_KH6521_22_35274_75_LB4A 18.08.2009 13:26 Uhr Seite 4 ...

INDEX PAGE 1. Technical Data 2 2. Intended use 2 3. Package contents 2 4. Operating components 2 5. Setting up of the DVD player 3 6. Safety instructions 3 7. Remote control 4 7.1 Inserting the batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 7.2 Using the remote control . . . . . . . . . . . . . . . . . . . . ...

DVD-PLAYER KH6521/22 1. Technical Data This device complies in regards to conformance with the basic requirements and other relevent regulations of the EMV directive 2004/108/EC, as well as the directive for low voltage devices 2006/95/EC. Power supply: AC 220 V - 240 V ~ 50 Hz Power consumption: 20 Watt Power consumption: Standby: < 1 W Protection class: II / TV standard: PAL/NTSC Operating temperature: +5 ~ +40°C Humidity: 5 ~ 90% (no condensation ...

C. Remote control q OPEN/CLOSE : Open/Close the disc tray w Number buttons e PLAY/PAUSE : Start/Suspend playback r MUTE : Switch the sound on/off t V-MODE: Set the video output y DIMMER: Adjust the display brightness u DISPLAY: Superimpose disc information i SKIP FWD o VOL +/- : Raise/lower the sound level a SKIP BWD s SUBTITLE: Set the subtitle d ENTER: Confirm input f Control buttons  g MENU/RIPPING: Access disc menu/ripping function h SLOW: ...

Danger! Laser radiation! This device is fitted with a „Class 1 Laser“. • Never open the device. • Never attempt to repair the device. • There is invisible laser radiation inside the device. Do not expose yourself to the laser beam. Note: Some aggressive furniture finishes can have a destructive influence on the device's rubber feet. If necessary, place the device on a nonslip pad. Thunderstorms! Equipment connected to a power supply can be ...

8.1 Connecting to a television via ScartCable/RGB Note: Connecting the DVD player to a television with a Scart cable via the RGB input offers a high quality connection. Select this connection variation in the case of televisions equipped with an RGB input. If you are not sure if the television is equipped with an RGB input then you can check this by consulting the television's instruction manual. • Connect the jack inscribed with SCART to a televis ...

On the rear panel of the DVD player you will find the connection sockets Y, U/Pb and V/Pr. Connecting the DVD player via component signal: • Connect the sockets Y (green), U/Pb (blue) and V/Pr (red) with the corres- ponding sockets on the television. • Connect the audio output sockets MIX L/R on the rear panel of the DVD player to the corresponding audio inputs on the television with an audio cinch cable. Make sure that the red and white colour m ...

Connection via coaxial cable To connect the DVD player to a digital audio component with a digital coaxial cable: • Connect the "COAXIAL" inscribed plug to the corresponding socket on the digital audio component. Connecting via optical cable To connect the DVD player to a digital audio component with an optical cable: • Remove the protective plug from the "OPTICAL" inscribed socket on the rear panel of the DVD player and insert the optical cable ...

10. OSD menu settings All of the DVD player's settings can be made with the remote control via the so called "On Screen Display" menu ("OSD menu" for short). The OSD Menu will be superimposed on the television screen. Note: In these instructions the English OSD menu is described. At any time you can set the menu to your country's language as described in "GENERAL > OSD LANGUAGE". Before you use the DVD player for the first time for playback of DVDs, ...

ANGLE MARK -ON If scenes are recorded on a DVD in different perspectives this will automatically be signified by a camera symbol displayed on the television screen. Press the ANGLE button on the remote control to display the various perspectives. -OFF Deactivate function. No symbol appears on the television screen. OSD LANGUAGE Here you set the language, in which the OSD Menu will be shown on the display. CLOSED CAPTIONS -ON Select this setting if by ...

EQUALIZER -SOUND MODE Select this menu input if, when playing back sound, you want to use one of the preset equalizer levels ROCK, POP, LIVE, DANCE, TECHNO, CLASSIC or SOFT. To deactivate this function select the input OFF. -BASS BOOST Select the setting ON if you want to boost the playback of the base tone. To deactivate this function select the input OFF. -SUPER BASS Select the setting ON to use the super base sound effect. In addition playback of ...

RESOLUTION In this menu input you can set the different resolutions (480i/576i/720p/1080i/1080p) for the HDMI output/component video output. Note: Be aware that for the TV standard PAL a setting with 50 Hz and for the TV standard NTSC a setting with 60 Hz must be selected. COLOR SETTING In this menu input you can implement the settings, for example, for the brightness, contrast or hue. -SHARPNESS Select this menu input to set one of the predefined s ...

11. Initial operation of the DVD player After you have … • placed the DVD player in a suitable location • connected the DVD player to a television by one of the designated connection options • connected the DVD player, if desired, to a HiFi or Surround system (analogue/digital) for example a Dolby Digital or DTS receiver • made the remote control ready for operation by inserting the batteries • and know how to activate and operate the OS ...

USB memory sticks (USB) The DVD player supports USB memory sticks 1.1 and 2.0 up to a capacity of 4GB. USB memory sticks must be inserted into the USB port. • Press the USB button on the remote control. If several memory mediums (USB and memory card) are inserted press, repeatedly, the USB button until the contents of the USB memory stick is displayed. This procedure also applies to particular memory cards. 11.3 Removing memory cards/USB memory st ...

In the display on the front panel of the DVD player, the following notices appear: With DVDs: • "DVD" • the number of the currently playing chapter • the played back so far time of the currently playing DVD in minutes and seconds With VCDs/S-VCDs: • "VCD" or "S-VCD" • the number of the currently playing title • the played back so far time of the currently playing VCD/S-VCD in minutes and seconds 12.1Features during playback of a DVD, VCD ...

Title number input via the number buttons Note: This function may not be available on all DVDs! If you attempt to execute a function that is not available, the symbol is displayed on the television screen. Instead of using the Skip function you can also enter the title from within the film on the inserted DVD/VCD/S-VCD direct by entering the title number via the number buttons on the remote control. • For this, during playback or when playback is ...

Image enlargement (Zoom) Note: This function may not be available on all DVDs! If you attempt to execute a function that is not available, the symbol is displayed on the television screen. During the playback of an inserted DVD/VCD/S-VCD you can enlarge the image on the television screen in three levels. For this press the ZOOM button on the remote control to set the following enlargement levels: With the control buttons sections of the enlargem ...

Programmed playback (PROG) Note: This function may not be available on all DVDs/VCDs/S-VCDs! If you attempt to execute a function that is not available, the symbol is displayed on the television screen. With the "Programme" function you can put together your own film programme in so far as you can select only certain chapters of an inserted DVD/VCD/S-VCD for playback. In this way you can determine for yourself the sequence, in which the chapters are ...

Repeat function with MP3/WMA/MPEG/ JPEG/Xvid discs During playback press the REPEAT button several times to apply the following repeat functions (the set function appears in the display): RANDOM Random playback of the titles on the disc and/or the data carrier. SINGLE One time playback of the current title/image. REPEAT ONE Endless repeat of the current title/image. REPEAT FOLDER Repeat the current folder. REPEAT ALL Repeat all titles on the disc an ...