Ryobi BT300 Operator's Manual

Text of Ryobi BT300 Operator's Manual

WARNING: To reduce the risk of injury, the user must read and understand the operator's manual before using this

product. OPERATOR'S MANUAL WIDE TABLE KIT 4730300 FOR USE WITH RYOBI BT3000 TABLE SAW SAVE THIS MANUAL FOR FUTURE REFERENCE Your new Wide Table Kit has been engineered and manufactured to Ryobi's high standard for dependability, ease of operation, and operator safety. Properly cared for, it will give you years of rugged, trouble-free pe

Ryobi BT300 SAVE THESE INSTRUCTIONS

The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols, and the explanations with them, deserve your careful attention and understanding. The safety warnings do not by themselves eliminate any danger. The instructions or warnings they give are not substitutes for proper accident prevention measures. SYMBOL MEANING DANGER: Indicates an imminently hazardous situ

SQUARE HEAD BOLT

WASHER HEX BOLT WASHER HEX NUT REAR EXTENSION RAIL CONNECTOR TABLE BRACKET WOOD SCREW SPACER FRONT EXTENSION RAIL Table Bracket.....................................................................8 Connector..........................................................................4 Front Extension Rail ..........................................................1 Square Head Bolt (1/4-20 x 1/2 in.).......

REAR RAILS SHOWN

ATTACHED CONNECTOR T-NUT WASHER HEX BOLT TABLE BRACKET SPACER REAR EXTENSION RAIL TO ATTACH FRONT EXTENSION RAIL See Figures 2 and 4.  Remove end caps from right end of front rail on your BT3000 table saw. See Figure 4.  Slide one of the T-nuts into bottom channel of front rail on your saw. Slide a second T-nut int

Ryobi BT300 TO ATTACH TABLE BRACKETS

 Slide two T-nuts into channel on rear portion of front extension rail. See Figures 2 and 4.  Attach two table brackets and secure with washers (5/16 in.) and hex bolts (5/16 in. x 1/2 in.) supplied. Hand tighten only.  Slide two T-nuts into channel on front portion of rear extension rail. See Figures 3 and 5.  Place a spacer between table brackets and T-nuts on rear extension r

TABLE LEGS (not supplied)

See Figure 8. Table legs can be made from either 2 x 4s or by purchasing a Ryobi Leg Set, #4730305, depending upon the application in which your saw is being used. For example, if your saw is being used in a permanent application you may want to use 2 x 4s which will be more sturdy and provide extra stability. The metal leg set may be preferable for portable applications or when moving your saw around in
SQUARE HEAD BOLT (1/4-20X1/2 IN.) TABLE BRACKET WASHER (1/4 IN.) HEX NUT (1/4 IN.) REAR EXTENSION TABLE AUXILIARY EXTENSION TABLE OPTIONAL BRACE OPTIONAL BRACE SLIDING MITER TABLE TABLE SAW SHOWN WITH THE AUXILIARY EXTENSION TABLE AND THE REAR EXTENSION TABLE This kit also includes brackets and connecting hardware for making an extension table behind the blade to provide support and control when ripping large

Now that you have purchased your Wide Table Kit, should a need ever exist for repair parts or service,

simply contact your nearest Ryobi Authorized Service Center. Be sure to provide all pertinent facts when you call or visit. RYOBI WIDE TABLE KIT NO. 4730300 * STANDARD HARDWARE ITEM — MAY BE PURCHASED LOCALLY 1 969117-001 Front Extension Rail..............................................................................................1 2 615570-014

RYOBI TECHNOLOGIES, INC.

1428 Pearman Dairy Road Anderson, SC 29625 Post Office Box 1207, Anderson, SC 29622-1207 Phone 1-800-525-2579 www.ryobitools.com 972000-219 10-03 • SERVICE Now that you have purchased your tool, should a need ever exist for repair parts or service, simply contact your nearest Ryobi Authorized Service Center. Be sure to provide all pertinent facts when you call or visit. Please call 1-800-525-2579 for your nearest Ryobi Autho

Ryobi Saw Owners Instructions: