Ryobi SS50 Operator's Manual

Text of Ryobi SS50 Operator's Manual

THANK YOU FOR BUYING A RYOBI SPEED SAW.

Your new Speed Saw has been engineered and manufactured to Ryobi's high standard for dependability, ease of operation, and operator safety. Properly cared for, it will give you years of rugged, trouble-free performance. CAUTION: Carefully read through this entire operator's manual before using your new Speed Saw. Pay close attention to the Rules for Safe Operation, Warnings, and Cautions. If you use your Speed Saw pr

Ryobi SS50 General Safety Rules .....................................................................................................................................3-4

■ Specific Safety Rules.......................................................................................

GENERAL SAFETY RULES

WARNING: Read and understand all instructions. Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury. SAVE THESE INSTRUCTIONS WORK AREA ■ Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents. ■ Do not operate power tools in explosive atmo- spheres, such as in the presence of flammable liquids, gases, or dust. Power tools may create s

Ryobi SS50 SPECIFIC SAFETY RULES

Hold tool by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring or its cord. Contact with a “live” wire will make exposed metal parts of the tool “live” and shock the operator. ADDITIONAL SAFETY RULES ■ Know your power tool. Read operator’s manual carefully. Learn its applications and limitations, as well as the specific potential hazards related to this tool. Follow

Ryobi SS50 Important: Some of the following symbols may be used on your tool. Please study them and learn their meaning.

Proper interpretation of these symbols will allow you to operate the tool better and safer. SYMBOL NAME DESIGNATION/EXPLANATION V Volts Voltage A Amperes Current Hz Hertz Frequency (cycles per second) W Watt Power min Minutes Time Alternating Current Type or a cha

Your Speed Saw has been shipped completely

assembled. ■Carefully remove the Speed Saw and accessories from the box. Make sure that all items listed in the packing list are included. ■Inspect the Speed Saw carefully to make sure no breakage or damage has occurred during shipping. ■Do not discard the packing material until you have carefully inspected and satisfactorily operated the tool. APPLICATIONS You may use

Your Ryobi power tool is double insulated. This means

you are separated from the tool's electrical system by two complete sets of electrical insulation. This extra layer of insulation is intended to protect the user from electrical shock due to a break in the wiring insulation. All exposed metal parts are isolated from the internal metal motor components with protecting insulation. Double insulated tools do not need to be grounded. WARN

Do not attempt to modify this tool or create accessories not recommended for use with this tool. Any such

alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury. SWITCH SPINDLE LOCK DEPTH ADJUSTMENT RING COLLET NUT BIT ADJUSTING KNOB

Your Speed Saw should never be connected to power

supply when you are assembling parts, making adjustments, cleaning, performing maintenance, or when not in use. Disconnecting your Speed Saw will prevent accidental starting that could cause serious injury. INSERTING/REMOVING BITS See Figure 2. Follow these directions when inserting and removing bits. ■UNPLUG YOUR SPEED SAW. WARNING: Failure to unplug your Speed Saw could result in

REMOVING DEPTH ADJUSTMENT RING

See Figure 4. Follow these directions when removing the depth adjustment ring. ■Place wrench in tab on depth adjustment ring. ■Depress spring-loaded tab. ■Lift depth adjustment ring off of tool. ASSEMBLING CIRCLE CUTTER See Figure 5. Follow these directions when assembling the circle cutter. ■Attach handle with screw provided. ■Attach pivot point knob with nut provided. ATTACHING CIRCLE CUTTER See Fig

STARTING/STOPPING SPEED SAW

See Figure 7. Follow these directions when starting and stopping the Speed Saw. To start Speed Saw: Depress the switch to the I position. To stop Speed Saw: Depress the switch to the O position. CAUTION: We suggest that you practice with your Speed Saw before installing a bit and making cuts. OPERATING SPEED SAW See Figure 8. Follow these directions when operating the Speed Saw. ■Hold Speed Saw firmly with both hands. ■St

When servicing use only identical Ryobi replacement parts. Use of any other parts may create a hazard or

cause product damage. GENERAL Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use. Use clean cloths to remove dirt, carbon dust, etc. WARNING: Do not at any time let brake fluids, gasoline, petroleum-based products, penetrating oil

RYOBI TECHNOLOGIES INC.

1428 Pearman Dairy Road Anderson, SC 29625 Post Office Box 1207 Anderson, SC 29622 www.ryobitools.com Phone 1-800-525-2579 983000-049 • SERVICE Now that you have purchased your tool, should a need ever exist for repair parts or service, simply contact your nearest Ryobi Authorized Service Center. Be sure to provide all pertinent facts when you call or visit. Please call 1-800-525-2

Ryobi Saw Owners Instructions: