Oki C110 Instruction Manual

Copyright © 2009 by Oki Data. All Rights Reserved C110 User’s Guide P/N 59318501, Revision 1.2 July, 2009 Every effort has been made to ensure that the information in this document is complete, accurate, and up-to-date. The manufacturer assumes no responsibility for the results of errors beyond its control. The manufacturer also cannot guarantee that changes in software and equipment made by other manufacturers and referred to in this guide will not affect the applicability of the information in it. Mention of software products manufactured by other companies does not necessarily constitute endorsement by the manufacturer . ...

Take Care with Toner Powder Emergency First Auid ! If swallowed, give small amounts of cold water and seek medical attention. DO NOT attempt to induce vomiting. ! If inhaled, move the person to an open area for fresh air. Seek medical attention. ! If it gets into the eyes, flush with large amounts of water for at least 15 minutes keeping eyelids open. Seek medical attention. Spillage Spillages should be treated with cold water and soap to help reduce risk of staining skin or clothing. ...

1 Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 Getting Acquainted with Your Printer...................................................... 8 Space Requirements ......................................................................... 8 Printer Parts....................................................................................... 9 The Control Panel ................................................................................ 11 The Indicators .................................................................................. 11 The Rotate Toner KEY................ ...

4 Media Handling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29 Print Media............................................................................................ 30 Specifications................................................................................... 30 Types .................................................................................................... 31 Plain Paper (Recycled Paper).......................................................... 31 Thick Stock ...................................................................................... 32 Labels .......................... ...

Indicator Messages............................................................................... 86 Status Messages ............................................................................. 86 Warning Messages ......................................................................... 87 Error Messages................................................................................ 88 Service Message ............................................................................. 89 Clearing Media Misfeeds ...................................................................... 90 Clearing Procedures ............................... ...

Getting Acquainted with Your Printer Space Requirements To ensure easy operation, consumable replacement and maintenance, adhere to the recommended space requirements detailed below. Side View Front View 496 mm (19.5") 100 mm (3.9") 396 mm (15.6") 707 mm (27.8") 100 mm (3.9") 380 mm (14.9") 520 mm (20.5") 127 mm (5.0") 245 mm (9.6") 275 mm (10.8") 100 mm (3.9") ...

Printer Parts The following drawings illustrate the parts of your printer referred to throughout this guide, so please take some time to become familiar with them. Front View 1—Output tray 2—Control panel 3—Front cover 4—Tray 1 (Multipurpose tray) 5—Top cover 6—Fuser unit 7—Fuser separator levers 8—Fuser cover lever 9—Imaging cartridge 10—Toner cartridge 1 2 3 4 5 7 7 6 9 10 8 6 10 9 ...

The Control Panel 1—Ready indicator 2—Attention indicator 3—Rotate Toner key 4—Toner indicators 5—Cancel key The Indicators The indicators use five types of signals: " Off " On " Slow blinking—1 blink every 2 seconds " Blinking—1 blink per second " Rapid blinking—2 blinks per second Each of the indicators has the following basic meaning. " Ready indicator When lit, printing can be performed. " Attention indicator When lit or blinking, an error has occurred or there is a warning. " Toner indicators When blinking, the toner for the corresponding color is about to run out. When lit, the toner in the corresponding c ...

For details on these indicator messages, refer to “Indicator Messages” on page 86. The Remote Panel Utility can also be used to check the printer status. For details, refer to “Working with the Remote Panel Utility” on page 25. The Rotate Toner KEY The Rotate Toner key allows you to switch the printer from normal operation mode to Change Toner mode, Eject All Toner mode or Print Head Cleanup mode. The mode that the printer enters depends on how long the Rotate Toner key is held down. Note When the printer is switched to any of these operation modes, the magenta toner indicator lights up. The Rotate Toner key is used in ...

When cleaning the print head window Hold down the Rotate Toner key for 5 seconds to 10 seconds. The printer enters Print Head Cleanup mode. Note For details on cleaning the print head window, refer to “Cleaning the Print Head Window” on page 73. Note To return to normal operation mode from Print Head Cleanup mode, refer to “Cleaning the Print Head Window” on page 73. Note Print Head Cleanup mode is a mode that allows the user to clean the print head window more easily. The print head window is not cleaned automatically. When replacing all toner cartridges at the same time Hold down the Rotate Toner key more than 10 seco ...

If any of the errors listed above occur, press the Cancel key to continue the print job. Cancelling a Print Job You can cancel a print job that is currently being processed. While data is being processed or printed (the green Ready indicator is blinking), hold down the Cancel key for more than 5 seconds to cancel the print job. Both the Ready and Attention indicators blink when the print job is cancelled. ...

The Printer Driver and Utility CD . Drivers Use/Benefit Windows Vista/Server 2008/XP/ Server 2003/2000 These drivers give you access to all of the printer features. For details, refer to“Displaying Printer Driver Settings” on page 20. Windows Vista/Server 2008/XP/ Server 2003 for 64bit Utilities Use/Benefit Remote Panel Utility From the Remote Panel Utility, the current status of this printer can be checked. For details, refer to “Working with the Remote Panel Utility” on page 25. Documentation Use/Benefit User’s Guide (this manual) This manual provides details on general daily operations, such as using the drivers an ...

System Requirements " Personal computer Pentium II: 400MHz or higher " Operating System – Microsoft Windows Vista Home Basic/Home Premium/Ultimate/ Business/Enterprise, – Windows Vista Home Basic/Home Premium/ Ultimate/Business/ Enterprise x64 Edition, – Windows Server 2008 – Windows Server 2008 x64 Edition – Windows XP Home Edition/Professional (Service Pack 2 or later), – Windows XP Professional x64 Edition – Windows Server 2003 – Windows Server 2003 x64 Edition – Windows 2000 (Service Pack 4 or later) " Free hard disk space 256 MB or more " RAM 128 MB or more " CD drive " I/O interface USB Revision 2.0 and ...

Selecting Printer Driver Defaults Before you start working with your Printer, you are advised to verify and change the default printer driver settings if necessary. 1 Choose the driver’s properties as follows: – (Windows Vista/Server 2008) From the Start menu, select Control Panel, and then click Hardware and Sound to select Printers. Right-click the icon for this printer, and then select Printing Preferences. – (Windows XP/Server 2003) From the start menu, select Printers and Faxes to display the Print- ers and Faxes directory. Right-click the icon for this printer, and select Printing Preferences. – (Windows 2000) Fro ...

Uninstalling the Printer Driver This section describes how to uninstall the printer driver if necessary. Note You must have administrator privileges in order to uninstall the printer driver. Note If the User Account Control window appears when uninstalling on Windows Vista or Server 2008, click the Allow button or the Continue button. Windows Vista/Server 2008/XP/Server 2003/2000 1 Close all applications. 2 Choose Uninstall Program as follows: – (Windows Vista/Server 2008/XP/Server 2003) From the Start, All programs menu, choose the item that contains the printer utilities, and then Uninstall. – (Windows 2000) From the Star ...

Displaying Printer Driver Settings Windows Vista/Server 2008 1 From the Start menu, select Control Panel, and then click Hardware and Sound to select Printers. 2 Right-click the icon for this printer then select Printing Preferences. Windows XP/Server 2003 1 From the start menu, select Printers and Faxes to display the Printers and Faxes directory. 2 Right-click the icon for this printer and select Printing Preferences. Windows 2000 1 From the Start menu, select Settings, and then click Printers to display the Printers directory. 2 Right-click the icon for this printer and select Printing Preferences. ...