Dyson DC11 Owner's Manual
Text of Dyson DC11 Owner's Manual
Please read this guide carefully
before using your DC11.
11323_DC11_USA_OWNER_MAN.qxd p1 9/23/04 2:43 PM Page 1
Important safety instructions
Dyson Helpline contact us on 1-866-693-9766
2
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER
When using an electrical appliance, basic precautions should always be
followed, including the following:
WARNING
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY:
1
Do not leave plugged in. Unplug from electrical outlet when not in use
and before servicing.
2
Do not use outdoors or on wet surf
This machine was inspected and
packaged carefully before being
shipped from the factory.
If you need assistance to assemble
or operate it, please call the Dyson
Helpline on 1-866-693-9766.
Clip the floor tool into the wand.
Press catch 1 to release wand and
extend it fully until the wand cuffs click.
Clip the hose into the wand.
1 Align the cuff and pins. 2 Clip
the hose into the machine.
Click the tools onto the machine.
Assembling your DC11
Assembling
Storing your DC11
Dyson Helpline contact us on 1-866-693-9766
4
Remove the floor tool from the
wand. Compact the wand.
To attach the wand to the machine,
clip catch 1 between bins then press
catch 2 to click it into place.
Loop the hose around the machine.
Clip the hose into sides 3 and 4.
Slide the floor tool into the parking
yoke. Please do not park the wand
in an upright position, as it’s not
designed for this.
Storing your DC11
2
3
4
1
11323_DC11_USA
To reduce the risk of electric shock
and personal injury, this appliance
has a polarized plug (one blade
wider than the other). This plug
will fit in a polarized outlet only
one way. If the plug does not fit
fully in the outlet, reverse the plug.
If it still does not fit, contact a
qualified electrician to install the
proper outlet. Do not force the
plug into the outlet. Do not alter
the plug in any way.
CAUTION
•
Keep hair, loose clothing,
Using your DC11
Dyson Helpline contact us on 1-866-693-9766
6
The tools clean upholstery, curtains
and stairs.
The tools fit the wand, wand handle and hose.
Hold the cable rewind button down
to rewind the cable.
CAUTION
•
Hold plug when rewinding onto
cord reel. Do not allow plug to
whip when rewinding.
11323_DC11_USA_OWNER_MAN.qxd p1 9/23/04 2:43 PM Page 6
Clean air turbine head
When you start the machine the
Turbine head is already in carpet
mode.
For bare floors, press in the button
to turn the brushbar off. To return
to carpet mode, pull out the button
or turn the machine off.
Optional Bare floor tool
Cleans bare floors gently.
Optional Mini turbine head
Cleans hair from confined spaces
such as the car.
1 Attach the enclosed adapter to
the Mini turbine head.
2 Attach the complete tool to the
end of the
Carrying your DC11
Dyson Helpline contact us on 1-866-693-9766
8
Crevice tool
Reaches into nooks and crannies.
For loose fabrics pull the trigger
and hold it to reduce suction.
For your safety do not press the
cyclone release catch when carrying
your machine.
CAUTION
•
Do not shake the machine when
carrying.
•
Ensure the cyclone pack and
wand handle are firmly secured
to the base.
•
Ensure the hose has clicked into
place on both sides.
Carrying your
Disconnect the machine from
the electrical outlet before
emptying the bin. Failure to do
so could result in electric shock
or personal injury.
•
Do not use the machine without
the clear bins
TM in place.
Empty the clear bins
TM as soon as
either one reaches the max mark.
Press the red catch 1 to release the
cyclone pack.
Press catch 2 to empty the bins.
Close the bin base securely.
To re-assemble the bin bases,
squeeze the hinges at the bac